Epoxy primer
(→Valspar) |
|||
| Line 2: | Line 2: | ||
[[Image:54_Dodge_Coronet_in_primer.jpg|right|thumb|350px|A 1954 Dodge Coronet body with a fresh coat of epoxy primer.]] | [[Image:54_Dodge_Coronet_in_primer.jpg|right|thumb|350px|A 1954 Dodge Coronet body with a fresh coat of epoxy primer.]] | ||
| − | Epoxy primer/sealer is a non-porous finish that is typically recommended as the first basecoat over bare steel. Various epoxy primers can also be applied over fiberglass, plastic, or the black iron phosphate coating that remains after "converting" rust. Care must be taken to observe the epoxy maker's recommendations in preparing the surface over which the epoxy is applied. | + | Epoxy primer/sealer is a non-porous finish that is typically recommended as the first basecoat over bare steel. Various epoxy primers can also be applied over fiberglass, plastic, or the black iron phosphate coating that remains after "converting" [[rust]]. Care must be taken to observe the epoxy maker's recommendations in preparing the surface over which the epoxy is applied. |
Epoxy primer is a two-part mix, with a hardener that has to be added before spraying. | Epoxy primer is a two-part mix, with a hardener that has to be added before spraying. | ||
Your Privacy Choices