Wheelbase, track width, and differential measurements
(→Guide for taking measurements) |
(→Guide for taking measurements) |
||
| Line 15: | Line 15: | ||
The second section will be listed as axle flange to axle flange where the wheel bolts on. Drum to drum would be close enough to the same if that's all the information you have to post. The only difference between the two would be the thickness of the material of the two drums or brake rotors/discs at the studs. | The second section will be listed as axle flange to axle flange where the wheel bolts on. Drum to drum would be close enough to the same if that's all the information you have to post. The only difference between the two would be the thickness of the material of the two drums or brake rotors/discs at the studs. | ||
| − | The third section will list backing plate to backing plate on the rear differential. This information will require knowing the width of the brake drum to determine flange to flange dimensions. Find brake drum width, multiply X two and add that figure to the plate to plate dimension to get flange to flange. | + | The third section will list backing plate to backing plate on the rear differential. This information will require knowing the width of the brake drum to determine flange to flange dimensions. Find brake drum width, multiply X two and add that figure to the plate to plate dimension to get flange to flange. |
==Wheelbase, front track, rear track== | ==Wheelbase, front track, rear track== | ||
Your Privacy Choices