Transmission coolers

From Crankshaft Coalition Wiki
Jump to: navigation, search
(Inline)
(TH350)
 
Line 6: Line 6:
 
==Cooler types==
 
==Cooler types==
 
===Stacked plate===
 
===Stacked plate===
The low pressure drop (LPD) stacked plate cooler is considered to be top of the line. The stacked plate design has good cooling vs. size and can be mounted in smaller spaces than other coolers.  
+
[[File:Stacked plate.jpg|right]]
  
 +
The stacked plate cooler is considered to be top of the line. The stacked plate design has good cooling vs. size and can be mounted in smaller spaces than other coolers.
 +
<br style="clear:both"/>
 
===Fin and tube===
 
===Fin and tube===
 +
[[File:Tube-fin.jpg]]
 +
 
The fin and tube coolers are cheaper to manufacture but are larger per amount of cooling capacity than the stacked plate design. If there's adequate space for mounting, the fin and tube can do a good job.
 
The fin and tube coolers are cheaper to manufacture but are larger per amount of cooling capacity than the stacked plate design. If there's adequate space for mounting, the fin and tube can do a good job.
  
Line 19: Line 23:
  
 
==Transmission case fitting threads==
 
==Transmission case fitting threads==
===TH350===
+
===T-350===
The threaded case port on the TH350 is either a female 1/4-18 NPSM (National Pipe Straight Mechanical) thread, and it uses a metal washer/seal. The straight thread fitting is the most common.
+
The threaded case port on the T-350 is either a female 1/4-18 NPSM (National Pipe Straight Mechanical) thread, and it uses a metal washer/seal. The straight thread fitting is the most common.
  
 
Or it will be a 1/4-18 NPT (National Pipe Tapered) thread.  
 
Or it will be a 1/4-18 NPT (National Pipe Tapered) thread.  
Line 26: Line 30:
 
There are also fittings to use AN cooler lines from the case (see photo below).
 
There are also fittings to use AN cooler lines from the case (see photo below).
  
[[File:An fittings th350.jpg]]
+
===T-400===
 
+
===TH400===
+
  
 
==Fitting to case torque==
 
==Fitting to case torque==
  
===TH350===
+
===T-350===
 
*Straight fitting to transmission case is 20-25 ft/lb
 
*Straight fitting to transmission case is 20-25 ft/lb
 
*Tapered fitting to transmission case is 15 ft/lb.
 
*Tapered fitting to transmission case is 15 ft/lb.
  
===TH400===
+
===T-400===
*TH400 fitting to transmission case is 28 ft/lb.
+
*T-400 fitting to transmission case is 28 ft/lb.
  
 
==Direction of flow==
 
==Direction of flow==
Line 45: Line 47:
 
So- OUT the bottom, IN the top.
 
So- OUT the bottom, IN the top.
  
{{Note1}}All except TH200C and TH2004R- which are opposite of the above.
+
{{Note1}}All except T-200C and 2004R- which are opposite of the above.
  
 
==Cooler line routing==
 
==Cooler line routing==
Line 62: Line 64:
  
 
<br><br>
 
<br><br>
{{newarticle1}}
+
 
  
 
[[Category:Transmission]]
 
[[Category:Transmission]]
[[Category:Cooling]]
 
[[Category:Undeveloped articles]]
 
[[Category:Undeveloped Cooling articles]]
 
[[Category:Undeveloped Transmission articles]]
 

Latest revision as of 19:20, 6 November 2023

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox