Torque converter installation error - Missed front pump
| Line 1: | Line 1: | ||
| + | '''Never bolt''' the torque converter to the flex plate (flywheel) first, then install the transmission. | ||
| + | |||
SO .. you've started to tighten up your 700r4, 4L60 or 4L60e bell housing to the motor and the #$(&# torque converter has run into the back of the flex-plate a bit too early. Getting those bolts into the back of the bell housing was tricky and you want to save some time by not entirely dropping the transmission again. Here's what you need to do: | SO .. you've started to tighten up your 700r4, 4L60 or 4L60e bell housing to the motor and the #$(&# torque converter has run into the back of the flex-plate a bit too early. Getting those bolts into the back of the bell housing was tricky and you want to save some time by not entirely dropping the transmission again. Here's what you need to do: | ||
Your Privacy Choices