Straightening a rear end housing
| Line 8: | Line 8: | ||
[[Image:Modified_jackstands.jpg|frame|none|Basic inexpensive jackstands are modified to wrap the I-beam for stability.]] | [[Image:Modified_jackstands.jpg|frame|none|Basic inexpensive jackstands are modified to wrap the I-beam for stability.]] | ||
| − | A straight bar is necessary. This hardened and chrome plated bar is about five feet long, and 1.5" in diameter. It's available from McMaster-Carr for about $115.00. Alternatively, an old length of scrap steel shafting can be used. V-blocks and a dial indicator can be used to ensure that a used bar is straight. | + | A straight bar is necessary. This hardened and chrome-plated bar is about five feet long, and 1.5" in diameter. It's available from McMaster-Carr for about $115.00. Alternatively, an old length of scrap steel shafting can be used. V-blocks and a dial indicator can be used to ensure that a used bar is straight. |
[[Image:Hardened_bar.jpg|frame|none|A hardened and chrome plated steel bar.]] | [[Image:Hardened_bar.jpg|frame|none|A hardened and chrome plated steel bar.]] | ||
Your Privacy Choices