Rust

Jump to: navigation, search
(=Sandblasting rust)
(Notes)
Line 1: Line 1:
 
==Notes==
 
==Notes==
  
===Sandblasting rust===
+
===Media blasting rust===
 +
*Sand is not recommended for media blasting panels. It acts like little hammers, warping panels with by compressive forces (analagous to hail). Use softer media (list examples).
 
Can be done, but must be cautious. Use a small sandblaster, or a sandblaster set on low (expand on this: distance, angle, etc.).
 
Can be done, but must be cautious. Use a small sandblaster, or a sandblaster set on low (expand on this: distance, angle, etc.).
 
*Can sandblasting "increase" rust? Or, if the rust is removed and the metal is sealed, shouldn't it be eliminated? Some thoughts on this are:
 
*Can sandblasting "increase" rust? Or, if the rust is removed and the metal is sealed, shouldn't it be eliminated? Some thoughts on this are:
Line 47: Line 48:
 
*Another argument against rust "treatments" is that many of them require the surface to be lightly rusted first. "Inducing" rust seems wrong to people.
 
*Another argument against rust "treatments" is that many of them require the surface to be lightly rusted first. "Inducing" rust seems wrong to people.
 
*Rust-protection products can either act as a coating, or as a sacrificial anode (explain).
 
*Rust-protection products can either act as a coating, or as a sacrificial anode (explain).
*Sand is not recommended for media blasting panels. It acts like little hammers, warping panels with by compressive forces (analagous to hail). Use softer media (list examples).
 
 
*If POR-15 and similar products have a "lifetime warranty", explain how guarantees like that don't involve labor costs, losses, or other related costs.
 
*If POR-15 and similar products have a "lifetime warranty", explain how guarantees like that don't involve labor costs, losses, or other related costs.
 
*One recommendation is: after sandblasting, remove some more of the surface metal by sanding with sandpaper. This is done to remove the salt, sand, moisture, etc. from the surface.
 
*One recommendation is: after sandblasting, remove some more of the surface metal by sanding with sandpaper. This is done to remove the salt, sand, moisture, etc. from the surface.

Revision as of 16:36, 9 April 2007

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox