Rust

Jump to: navigation, search
(Miscellaneous (need to be sorted))
(Rust removers and "converters")
Line 129: Line 129:
  
 
===Rust removers and "converters"===
 
===Rust removers and "converters"===
After using an acid to remove rust, flush the surface with water and baking soda (confirm or expand on this).
+
After using an acid to remove rust, flush the surface with water and baking soda '''(confirm or expand on this)'''.
  
 
When converting/neutralizing rust:
 
When converting/neutralizing rust:
# Get everything off first that you can by sanding and wire brushing (wire brushing will get into the pits better)
+
# Get everything off first that you can by sanding and wire brushing (wire brushing will get into the pits better).
 
# A rust converter/neutralizer containing phospheric acid or another type of acid shold be used
 
# A rust converter/neutralizer containing phospheric acid or another type of acid shold be used
# Be careful of getting this stuff on your concrete floor as it will bubble and decompose it
+
# Be careful of getting this stuff on your concrete floor as it will bubble and decompose it.
# Follow the instructions on the bottle when you are done there should be a fine coating on the metal which will help prevent further rust from developing
+
# Follow the instructions on the bottle when you are done there should be a fine coating on the metal which will help prevent further rust from developing.
# This stuff is hard on paintbrushes (eats away the brisles) and you must be very careful of your eyes. Also it will ruin paint so again use caution.
+
# This stuff is hard on paintbrushes (eats away the brisles) and you must be very careful of your eyes. Also it will ruin paint, so, again, use caution.
  
 
Lots of "rust neutralizers/metal etchers/floor etchers/metal conditioners" contain primarily phosphoric acid, which reacts with rust (iron oxide) to create iron phosphate, a hard black substance over which primer can be applied.
 
Lots of "rust neutralizers/metal etchers/floor etchers/metal conditioners" contain primarily phosphoric acid, which reacts with rust (iron oxide) to create iron phosphate, a hard black substance over which primer can be applied.

Revision as of 20:26, 25 August 2009

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox