Points distributor
(Remove image, template, catagory; add image, text.) |
(Add text) |
||
| Line 1: | Line 1: | ||
==Overview== | ==Overview== | ||
| − | Points were used from almost the beginning of the internal combustion engine up until electronic-type ignition systems took over during the "smog years" of the early 1970s. | + | Points were used from almost the beginning of the internal combustion engine up until electronic-type ignition systems took over during the "smog years" of the early 1970s. There were a few examples of optional ignitions that were transistorized, etc. but these were expensive, temperamental and not widely used especially for street vehicles. Until the HEI came out in 1974, GM vehicles mainly used points and condenser ignitions. |
| − | One type of points used by GM | + | One type of points used by GM was the "Uniset" type points, shown below. The Uniset points can be used in any distributor having a cap originally equipped with a window for points adjustment. Cheap examples used a clip to hold the wire from the coil instead of a screw that securely held the wire. Both types (clip or screw) were used regardless if Uniset or separate points and condenser. |
[[File:Ac d118.jpg]] | [[File:Ac d118.jpg]] | ||
Your Privacy Choices