Phosphoric acid as metal pretreatment

From Crankshaft Coalition Wiki
Jump to: navigation, search
(Use of phosphoric acid in an industrial setting)
(House of Kolor)
 
Line 12: Line 12:
 
#Ospho is totally neutralized by reaction with both the rust particles and the steel underneath.  
 
#Ospho is totally neutralized by reaction with both the rust particles and the steel underneath.  
 
#Because Ospho is water-based, the water can hide in nooks and crannies, causing adhesion failure of primer
 
#Because Ospho is water-based, the water can hide in nooks and crannies, causing adhesion failure of primer
 +
 +
For details on Ospho use, see [[Rust removal with Ospho]].
  
 
===Resources===
 
===Resources===
Line 58: Line 60:
 
*[http://www.houseofkolor.com/PDF/TechData/English/KP21.pdf House of Kolor Kwikure Epoxy Primer Surfacer tech sheet]:
 
*[http://www.houseofkolor.com/PDF/TechData/English/KP21.pdf House of Kolor Kwikure Epoxy Primer Surfacer tech sheet]:
 
<blockquote>
 
<blockquote>
''"If you find it necessary to use a metal conditioner to remove rust, etc., be sure to thoroughly clean and nutralize the treated area following the conditioner manufacturers recommendations, then using our KC20 post sanding cleaner with a maroon scuff pad to insure all acid residue has been removed before priming. If not, this will almost certainly cause an adhesion problem."''
+
''"'''NOTE:''' Do not use any acid base products such as self etching primer, etc. under the KP2CF primer. This will almost certainly cause an adhesion problem.''
 +
<br>
 +
'''''NOTE:''' If you find it necessary to use a metal conditioner to remove rust, etc., be sure to thoroughly clean and neutralize the treated area following the conditioner manufacturers recommendations, then using our KC20 post sanding cleaner with a maroon scuff pad to insure all acid residue has been removed before priming. If not, this will almost certainly cause an adhesion problem."''
 
</blockquote>
 
</blockquote>
  
Line 85: Line 89:
 
*http://www.skybryte.com/index.html
 
*http://www.skybryte.com/index.html
 
*http://www.ospho.com/data.htm
 
*http://www.ospho.com/data.htm
 +
*http://www.hotrodders.com/forum/compatability-spi-ospho-74054.html
 +
*http://www.spiuserforum.com/showthread.php?8-What-every-new-painter-must-read!
  
 
[[Category:Body and exterior]]
 
[[Category:Body and exterior]]

Latest revision as of 16:02, 27 August 2010

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox