Make a fiberglass fan shroud

Jump to: navigation, search

@@ Line 34: / Line 34: @@
 [[Image:9it's hot melt glue.JPG|center|600px]]
-I knew that one part of the shroud was going to be perfectly round, so I set it up with a bolt in the center and made it so it could be spun by hand against an end mill to shape the circle as well as cut the box section down to it's proper thickness.
+I knew that one part of the shroud was going to be perfectly round, so I set it up with a bolt in the center and made it so it could be spun by hand against an end mill to shape the circle as well as cut the box section down to its proper thickness.
 [[Image:10fast way to make a perfect circle.JPG|center|600px]]
@@ Line 40: / Line 40: @@
 [[Image:11more shaping.JPG|center|600px]]
-[[Image:13roughed out some more.JPG|center|600p]]
+[[Image:13roughed out some more.JPG|center|600px]]
 [[Image:14edge detail.JPG|center|600px]]

Revision as of 07:05, 24 June 2007