Installing a stereo
From Crankshaft Coalition Wiki
Crashfarmer (Talk | contribs) (→finished) |
(→Finished) |
||
| Line 1: | Line 1: | ||
| − | The purpose of this article is to help in the installation of sound systems | + | The purpose of this article is to help in the installation of sound systems. |
| + | == Tools needed == | ||
| + | Here are some tools that you will need: | ||
| + | # Socket set | ||
| + | # Screwdrivers | ||
| + | # Soldiering Iron | ||
| + | # Wire Stripper | ||
== Remove your old radio == | == Remove your old radio == | ||
| − | |||
| − | |||
[[Image:87elcosteroins.jpg]] | [[Image:87elcosteroins.jpg]] | ||
==Use of an installation kit == | ==Use of an installation kit == | ||
| + | [[Image:Instkit.jpg]] | ||
| − | |||
| − | |||
| − | |||
| − | |||
This kit is fitted with the factory radio brackets. The brackets provided with the kit didn't fit this application when it was test fitted the first time so the brackets that were on the factory radio had to be installed on the kit. | This kit is fitted with the factory radio brackets. The brackets provided with the kit didn't fit this application when it was test fitted the first time so the brackets that were on the factory radio had to be installed on the kit. | ||
| − | |||
[[Image:Testfit.jpg]] | [[Image:Testfit.jpg]] | ||
| − | |||
Test fit the kit. Some fabrication is going to be required. | Test fit the kit. Some fabrication is going to be required. | ||
| Line 27: | Line 26: | ||
[[Image:Alterkit.jpg]] | [[Image:Alterkit.jpg]] | ||
| − | |||
Some quick and easy fabrication using a rotary tool. | Some quick and easy fabrication using a rotary tool. | ||
| Line 33: | Line 31: | ||
[[Image:Itfits.jpg]] | [[Image:Itfits.jpg]] | ||
| − | |||
| − | |||
| + | It fits! | ||
== Wiring == | == Wiring == | ||
| + | [[Image:Soldier.jpg]] | ||
| + | [[Image:Wiring.jpg]] | ||
| + | ==Finished== | ||
| + | [[Image:Finished.jpg]] | ||
| − | |||
| − | + | [[Category:Electrical]] | |
| − | [[ | + | |
Your Privacy Choices