Editing How to title a hot rod (section)
Jump to:
navigation
,
search
====Titling scratch built or reconstructed rods and motorcycles in Iowa==== Having just been through this process, here's the procedure, how it went for me,and a few tips.I built a trike,however this procedure is the same for street rods and motorcycles etc,that are built from scratch. # Hopefully before you start your project, download the "Equipment Requirements" link above. This document lists the minimum items the inspector will be looking for when the time comes. Print out several copies, study it and know it like the back of your hand. Yes, it says your street rod has to have fenders, and in the state of Iowa it's supposed to, at least for the first inspection. Take them off later if you want. # Save all receipts and document everything as you go. Do not use a major part in your project if you do not have documentation for it. What kind of documentation?? For the engine and trans for example, you must have some sort of document that shows where these pieces came from. If you have an engine in your garage that has been sitting there for years and you have no documentation for it you have a couple choices: Don't use it, get a buddy to forge a receipt for it. Or be able to show a title to a vehicle that you got the parts from. The trail doesn't have to be real long, just somebody they can contact to verify you purchased it from somebody and have rightful ownership of the item. Ideally, if you have an OEM frame, body or portion of either, you should have a title or receipt showing where you got the item. Again, the trail doesn't have to be long, just a trail. If you scratch build a frame, be able to show where the steel came from. # Build away. Follow the rules, make it look decent, document it well, and you should fly through. Do something weird and you'd better expect to answer for it, depending on who the inspector is. Just do it right and you'll have no problems. If you have any questions, either consult with somebody who's been through the process before, or go straight to your local DMV investigator. The investigators are listed in the link above. # Once you're done, or think you're done, contact your local DMV investigator and make an appointment for your inspection. BTW, the vehicle does not have to be completed to the point of being pained and show ready. It has to be assembled and road worthy, that's it. So if you want to get the documentation done/road tested and then tear it back down for paint etc that's your choice, it does not have to be fully complete for inspection. Here's how it goes: a. You will either have to transport your vehicle (no driving it) to the DMV office, or the investigator will come to you. My person acted like it could be done either way, and she came to me, but some have said they had to go to the office. Depends on the investigator I think. Let them know that you have the above list of requirements and believe that you've met all of them. Have a printout in hand when they show up, they'll ask for it. b. The actual physical inspection. All investigators are different. Some will only give your project a cursory once-over, some will nit pick it all the way. Mine only looked to see that I had lights, horn, etc., didn't even ask to see that they worked. When she started down the list of requirements and I was able to show her each of the first three or four she pretty much gave up, she knew it was a waste to check each one. I think what it comes down to is if your vehicle looks like you knew what your doing, it's safely constructed, and you won't kill somebody else the first trip around the block, the inspector isn't gonna have a problem with it. Put together something questionable and you'll be in for a battle. c. Review of documentation. Again, better to show them you're on the up and up than try to hide something. If you have a 2" thick pile of documentation your gonna be better off than if you have 2 Walmart receipts. Also, they will want copies of all receipts, it's probably in your best interest to have 2 copies ready for them. Mine took them back to the office for copying and delivered them back to me the next day. Having a set of copies will save them the trip, and get you registered one day sooner. Also, your receipts will determine the taxable value of your vehicle, which determines the amount of Iowa road use tax that you will pay. You will be taxed at the state sales tax rate (5% as of 2007) on all parts you have not paid tax on. See hints below. d. VIN assignment. Seems to be standard procedure that the inspector will bring the assigned VIN sticker with them and will attach it once the inspection is complete. They will also ask to stamp the new VIN somewhere in the frame. You will want a bare metal spot masked off for the stamping, or you will have to grind off a spot for it. It has to be stamped on bare steel. You can paint or clear coat the spot after. e. Actual registration. Once your inspection is complete, your investigator will notify your county treasurer's office with the information from your vehicle. In my case she Emailed both me and the treasurer's office right from her car before leaving my house. They will include your vehicle description, assigned VIN and the amount you owe tax on. You go to the license plate office, fill out the application for title, pay your taxes and your done. Even though it took three people and a review of a couple procedure manuals, it was probably the shortest trip I've had there in a long time.
|
Editing help
(opens in new window)
Personal tools
Log in / create account
Namespaces
Page
Discussion
Variants
Views
Read
Edit
View history
Actions
Search
Navigation
Main Page
Recent changes
Random page
Help
All articles
Start a new article
Hotrodders forum
Categories
Best articles
Body and exterior
Brakes
Cooling
Electrical
Engine
Fasteners
Frame
Garage and shop
General hotrodding
Identification and decoding
Interior
Rearend
Safety
Steering
Suspension
Tires
Tools
Transmission
Troubleshooting
Wheels
Toolbox
What links here
Related changes
Special pages
Terms of Use
Copyright
Privacy Policy
Your Privacy Choices
Manage Consent