|
|
| Line 1: |
Line 1: |
| − | {{youcanedit}}
| + | Contact adhesives are adhesives that are generally applied to both surfaces to be glued, and allowed to dry a little before adhering together. Contact adhesives are common in automotive interior work. All-purpose glues |
| | | | |
| − | ==Overview==
| |
| − |
| |
| − | Contact adhesives are adhesives that are generally applied to both surfaces to be glued, and allowed to dry a little before adhering together. Contact adhesives are common in automotive interior work.
| |
| − |
| |
| − | ==Spray guns==
| |
| − | [[Image:Low-cost-HF-spray-gun.jpg|300px|thumb|left|A low-cost spray gun from [[Harbor Freight]], suitable for shooting contact adhesive.]]
| |
| − |
| |
| − | Professional interior work typically necessitates the use of a spray grade adhesive, applied with a spray gun and air compressor. You will need a 1.8-2.2 mm nozzle. One inexpensive example is this [http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=43760 $20 paint spray gun], available from [[Harbor Freight]]. The gun pictured is a conventional siphon feed spray gun that has external mix, meaning the adhesive and air are mixed at the end of the nozzle. This feature keeps the gun from getting full of adhesive. You can keep the adhesive in the gun cup for long periods of time and still be able to spray right away, without having to empty the cup and clean the gun.
| |
| − |
| |
| − | Although aerosol cans of contact adhesive are convenient, they aren't recommended for overhead applications, and lack the strength of spray grade contact adhesives because they have to be thinned down to flow properly out of the can's nozzle.
| |
| − |
| |
| − | After the initial cost of a spray gun purchase, bulk adhesives will always be more cost-effective than aerosols.
| |
| − | <br style="clear: all" />
| |
| − | ==All-purpose glues==
| |
| | Many common all-purpose glues may not be the best choice for interior automotive work. Such glues may expand, bubble, and foam. | | Many common all-purpose glues may not be the best choice for interior automotive work. Such glues may expand, bubble, and foam. |
| | | | |
| − | However, certain products are engineered for automotive work, and are recommended. | + | However, certain products are engineered for automotive work, and are recommended. Contact adhesives suitable for automotive work DAP Landau Top & Trim Contact Adhesive |
| − | | + | |
| − | ==Removing contact adhesive==
| + | |
| − | *Hotrodders forum thread, [http://www.hotrodders.com/forum/removing-spray-adhesive-171373.html Removing spray adhesive]
| + | |
| − | | + | |
| − | ==Contact adhesives suitable for automotive work==
| + | |
| − | | + | |
| − | ===DAP Landau Top & Trim Contact Adhesive===
| + | |
| − | Available for about [http://www.yourautotrim.com/noname37.html $32 per gallon]. This product is also available in 5 gallon cans at about $90 per can, or about $18.00 per gallon.
| + | |
| − | | + | |
| − | *[http://www.dap.com/product_details.aspx?BrandID=59&SubcatID=9 Product listing at Dap.com]
| + | |
| − | *[http://www.dap.com/docs/msds/00030528_english.pdf MSDS]
| + | |
| − | *[http://www.dap.com/docs/tech/00030528.pdf Technical bulletin]
| + | |
| − | | + | |
| − | ===Performance Hi-Temp Trim Spray Adhesive===
| + | |
| − | *[http://www.yourautotrim.com/perhittrimad.html Performance Hi-Temp Trim Spray Adhesive]
| + | |
| − | | + | |
| − | ===3M Automotive adhesives===
| + | |
| − | ====Hi-Strength 90 Spray Adhesive====
| + | |
| − | *[http://solutions.3m.com/wps/portal/3M/en_US/Health/Safety/Products/Related/?PC_7_RJH9U52300A9E023IJD0GR3O74_nid=R4CV98LC6SgsHDSVSV648CglWQJKVP8FD5bl Details]
| + | |
| − | *[http://multimedia.3m.com/mws/mediawebserver?66666UuZjcFSLXTtlxTcOXTyEVuQEcuZgVs6EVs6E666666-- Technical data]
| + | |
| − | *[http://multimedia.3m.com/mws/mediawebserver?66666UtN&ZUxL99Xlxfy5XM_5Vu9KcuZgVU_LXT1u666666-- MSDS]
| + | |
| − | | + | |
| − | ====8090 super trim adhesive====
| + | |
| − | Designed for bonding vinyl tops, heavyweight liners, and hood silencer pads.
| + | |
| − | *[http://solutions.3m.com/wps/portal/3M/en_US/3MAutomotive/Aftermarket/Products/Product-Catalog/?PC_7_RJH9U5230GE3E02LECFTDQCEK3_nid=FZW75P9L3PgsNGQGZXQ0C5gl5584HBPMRMbl Info]
| + | |
| − | *[http://multimedia.3m.com/mws/mediawebserver?66666UtN&ZUxL99X4x&XNXfVOVu9KcuZgVU_LXT1u666666-- MSDS]
| + | |
| − | *[http://multimedia.3m.com/mws/mediawebserver?66666UuZjcFSLXTtNXM_M8&yEVuQEcuZgVs6EVs6E666666-- Instructions and product features]
| + | |
| − | *[http://multimedia.3m.com/mws/mediawebserver?66666UuZjcFSLXTt4XM2L8TyEVuQEcuZgVs6EVs6E666666-- Data sheet]
| + | |
| − | | + | |
| − | ====8088 general trim adhesive====
| + | |
| − | Low VOC, clear adhesive for bonding carpeting, jute pad, fabrics and plastics to metal.
| + | |
| − | | + | |
| − | *[http://solutions.3m.com/wps/portal/3M/en_US/3MAutomotive/Aftermarket/Products/Product-Catalog/?PC_7_RJH9U5230GE3E02LECFTDQCEK3_nid=77FN1346SDgsNGQGZXQ0C5glQ66MSWGSV3bl Info]
| + | |
| − | *[http://multimedia.3m.com/mws/mediawebserver?66666UtN&ZUxL99XlxfamxT_OVu9KcuZgVU_LXT1u666666-- MSDS]
| + | |
| − | *[http://multimedia.3m.com/mws/mediawebserver?66666UuZjcFSLXTtNXM_mXTtEVuQEcuZgVs6EVs6E666666-- Instructions and product features]
| + | |
| − | *[http://multimedia.3m.com/mws/mediawebserver?66666UuZjcFSLXTt4xMcNxTcEVuQEcuZgVs6EVs6E666666-- Data sheet]
| + | |
| − | ====3M product links====
| + | |
| − | *[http://solutions.3m.com/wps/portal/3M/en_US/3MAutomotive/Aftermarket/Products/Product-Catalog/?PC_7_RJH9U5230GE3E02LECFTDQCEK3_nid=2PLHXNH6SFbeNGQGZXQ0C5gl Listing of all 3M automotive adhesive products]
| + | |
| − | | + | |
| − | ===V&S 1081===
| + | |
| − | Formulated for high-temperature applications.
| + | |
| − |
| + | |
| − | *[http://www.glueplace.com/1081-spray-trim-adhe.html V&S 1081 spray trim adhesive].
| + | |
| − |
| + | |
| − | ===HV-350===
| + | |
| − | HV-350 is designed for high-vibration applications. It can be sanded and painted, and maintains its adhesive and sealant properties in water. Can be used on porous and non-porous surfaces.
| + | |
| − | | + | |
| − | *[http://www.valco-cp.com/hv-350.htm HV-350 multi-purpose adhesive, from Valco Cincinnati Consumer Products]
| + | |
| − | *[http://www.valco-cp.com/MSDS%20sheets/HV-350%20NON-SLUMP.pdf HV-350 MSDS]
| + | |
| | | | |
| − | ===K-Grip===
| + | Kwik-Spray Using contact adhesive to glue foam together Kwik-Spray and K-Grip adhesives, useful for glueing together foam. Contact adhesives can be used to glue foam together. Landau Top & Trim Contact Adhesive is specifically recommended for this, as is K-Grip and Kwik-Spray. The latter comes in two different formulations: a heavy viscosity 225 and a 220. These adhesives can be sprayed from a regular spray gun but a Critter spray gun is especially useful because its container is a standard Mason jar. To change glues, simply switch jars, and cap the one not being used. |
| − | *[http://www.k-gripadhesives.com/Pages/PAGE_200.html K-Grip 200 series of adhesives]
| + | |
| | | | |
| − | ===Kwik-Spray===
| |
| | | | |
| − | ==Using contact adhesive to glue foam together==
| + | EZE TB 2A Spray Gun with the metal cup |
| − | [[Image:Kwik-Spray_and_K-Grip_with_Critter_sprayer.jpg|300px|thumb|left|Kwik-Spray and K-Grip adhesives, useful for glueing together foam.]]Contact adhesives can be used to glue foam together. Landau Top & Trim Contact Adhesive is specifically recommended for this, as is K-Grip and Kwik-Spray. The latter comes in two different formulations: a heavy viscosity 225 and a 220. These adhesives can be sprayed from a regular spray gun but a [http://www.crittersprayproducts.com/ Critter] spray gun is especially useful because its container is a standard Mason jar. To change glues, simply switch jars, and cap the one not being used.
| + | |
| − | <br clear="all">
| + | |
| − | [[Image:EZE_spray_gun.jpg|300px|thumb|left|EZE TB 2A Spray Gun with the metal cup]]
| + | |
| − | Another small spray gun that works well with K-Grip and K-Spray is the EZE TB 2A sprayer from Chick Tool Co. It is designed specifically to spray these types of glue, and is less expensive than the Critter Sprayer. It also comes with either a plastic cup or a metal cup. Choose the model with the metal cup.
| + | |
| − | K-Grip and Kwik-Spray are useful in foam-to-foam applications because they produce less fumes. In addition, they don't need to be perfectly dry to put the two pieces of foam together, and aren't as aggressive as the top and trim adhesive, while being equally effective at holding foam together. These two products are perfect to glue fabric, vinyl, leather, and Ultraleather to sew foam.
| + | |
| − | <br clear="all">
| + | |
| − | ==References==
| + | |
| − | ;Hotrodders forum
| + | |
| − | :*[http://www.hotrodders.com/forum/contact-adhesive-163489.html Contact adhesive]
| + | |
| − | :*[http://www.hotrodders.com/forum/interior-glue-what-best-170767.html Interior glue, what is best?]
| + | |
| − | ;Wikipedia
| + | |
| − | :*[http://en.wikipedia.org/wiki/Adhesive Adhesives]
| + | |
| | | | |
| − | [[Category:Interior]]
| + | Another small spray gun that works well with K-Grip and K-Spray is the EZE TB 2A sprayer from Chick Tool Co. It is designed specifically to spray these types of glue, and is less expensive than the Critter Sprayer. It also comes with either a plastic cup or a metal cup. Choose the model with the metal cup. K-Grip and Kwik-Spray are useful in foam-to-foam applications because they produce less fumes. In addition, they don't need to be perfectly dry to put the two pieces of foam together, and aren't as aggressive as the top and trim adhesive, while being equally effective at holding foam together. These two products are perfect to glue fabric, vinyl, leather, and Ultraleather to sew foam |
| − | [[Category:Good articles]]
| + | |
Your Privacy Choices