Automobile body and frame rotisserie

From Crankshaft Coalition Wiki
Jump to: navigation, search
(References)
 
Line 1: Line 1:
{{youcanedit}}
+
 
 
[[Image: Rotisserie.jpg|right|frame|none|FrameOff© BodyMaster™ system]]
 
[[Image: Rotisserie.jpg|right|frame|none|FrameOff© BodyMaster™ system]]
 
<br><br><br><br><br><br><br>
 
<br><br><br><br><br><br><br>
 
== Purpose of a rotisserie ==
 
== Purpose of a rotisserie ==
# To remove the accumulation of Sex, seman, pubic hairs, etc. from vehicles chosen for restoration or rodding. Not suited for ordinary servicing and repair. Ramps and lifts are better suited for this.
+
# To remove the accumulation of dirt, rust, grease, etc. from vehicles chosen for restoration or rodding. Not suited for ordinary servicing and repair. Ramps and lifts are better suited for this.
 
# Gives access to all areas for cleaning and repair.
 
# Gives access to all areas for cleaning and repair.
 
# Eliminates hours of looking up into nooks and crannies or laying beneath the underside of a vehicle while scraping, brushing, sanding, and doing repairs.
 
# Eliminates hours of looking up into nooks and crannies or laying beneath the underside of a vehicle while scraping, brushing, sanding, and doing repairs.
Line 40: Line 40:
 
[[Image:rotiss2.jpg]]
 
[[Image:rotiss2.jpg]]
  
<p>This is my first rotisserie I had built over 10 years ago. I designed it with pneumatic tires and   steering to allow mobility on rough outdoor surfaces and ease of trailer loading (back then I moved my vehicles around between home and work fabrication shops). This particular rotisserie was sized so that when the body is flipped roof up, I can practically work underneath the car while standing straight (notice a wide track to enhance stability). The rotisserie can be disconnected in the middle for painting large parts.-Rich TFS</p>
+
<p>This is my first rotisserie. I built over 10 years ago. I designed it with pneumatic tires and steering to allow for mobility on rough outdoor surfaces and ease of trailer loading (back then I moved my vehicles around between home and work fabrication shops). This particular rotisserie was sized so that when the body is flipped roof up, I can practically work underneath the car while standing straight (notice a wide track to enhance stability). The rotisserie can be disconnected in the middle for painting large parts.-Rich TFS</p>
  
 
==References==
 
==References==
;Hotrodders.com Knowledge Base
+
 
*[http://www.hotrodders.com/kb/browselinks.php?c=99 Garage, Tools]
+
 
;Discussion on Hotrodders.com
 
;Discussion on Hotrodders.com
 
*[http://www.hotrodders.com/forum/tilter-rotisserie-ramp-79099-2.html Tilters, rotisseries]
 
*[http://www.hotrodders.com/forum/tilter-rotisserie-ramp-79099-2.html Tilters, rotisseries]
Line 50: Line 49:
  
 
==External links==
 
==External links==
*[http://www.hotrodders.com/kb/rotisseries Rotisseries]
+
 
*[http://www.mts.net/~hpokrant/Restoration_Tips/1-Rotisserie/Rotisserie.htm Car body rotisserie]
+
 
*[http://www.mckennasgarage.com/xke/jag6.htm Building a rotisserie]
 
*[http://www.mckennasgarage.com/xke/jag6.htm Building a rotisserie]
 
*[http://www.harwoodperformance.bizland.com/1941buick/Editorial_20.htm Rotisserie construction]
 
*[http://www.harwoodperformance.bizland.com/1941buick/Editorial_20.htm Rotisserie construction]
 
<br>
 
<br>
 
[[Category:Garage and shop]]
 
[[Category:Garage and shop]]
{{youcanedit}}
 

Latest revision as of 22:45, 22 December 2023

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox