Rust
(→Weld-through primer) |
(→Panel adhesives) |
||
| Line 307: | Line 307: | ||
Wet-sand down to 400 grit, wash/dry, grind down rust to bare metal, apply body filler where needed, blow off, clean with prep-sol or similar cleaner, tape it up, and prime with epoxy primer. | Wet-sand down to 400 grit, wash/dry, grind down rust to bare metal, apply body filler where needed, blow off, clean with prep-sol or similar cleaner, tape it up, and prime with epoxy primer. | ||
| − | + | ||
| − | + | ||
===Cavity waxes and seam sealers=== | ===Cavity waxes and seam sealers=== | ||
Your Privacy Choices