Rust
(→Various commercial rust treatment products) |
(→Various commercial rust treatment products) |
||
| Line 386: | Line 386: | ||
====Rust converters/dissolvers==== | ====Rust converters/dissolvers==== | ||
| − | *[http://www.tinmantech.com/html/must_for_rust_remover_inhibi.php Must for Rust] | + | *[http://www.tinmantech.com/html/must_for_rust_remover_inhibi.php Must for Rust] Merchant description: removes rust and corrosion, non-caustic to skin, needs no neutralizing, primer goes right over it. $28/gallon. |
| − | *[http://www.eastwoodco.com/shopping/product/detailmain.jsp?itemID=15974&itemType=PRODUCT&iMainCat=373&iSubCat=374&iProductID=15974 Eastwood Rust Converter] | + | *[http://www.eastwoodco.com/shopping/product/detailmain.jsp?itemID=15974&itemType=PRODUCT&iMainCat=373&iSubCat=374&iProductID=15974 Eastwood Rust Converter] Merchant description: 2-part mix, adheres to bare or rusty steel, and can be topcoated with most coatings. 1 gallon each of the 2-part mix is $125. |
| − | *[http://www.rust-cure.com/ Rust Cure] | + | *[http://www.rust-cure.com/ Rust Cure] Merchant description: phosphoric acid-based. leaves a thin film that bonds well with most primers and paints. for pricing, need to see this page: http://rustcure.bizland.com/xwheretobuy.html . |
*[http://www.eastwoodco.com/jump.jsp?itemID=1124&itemType=PRODUCT Oxisolv Rust Remover] Merchant description: dissolves rust and leaves behind a zinc phosphate coating. Spray/brush/dip. Non-toxic, non-flammable, and re-usable. Must be cleaned off before priming. | *[http://www.eastwoodco.com/jump.jsp?itemID=1124&itemType=PRODUCT Oxisolv Rust Remover] Merchant description: dissolves rust and leaves behind a zinc phosphate coating. Spray/brush/dip. Non-toxic, non-flammable, and re-usable. Must be cleaned off before priming. | ||
| + | *[http://www.eastwoodco.com/jump.jsp?itemID=11122&itemType=PRODUCT Eastwood Rust Dissolver] Merchant description: acid free rust remover, leaves surface ready to paint, plate, or powder coat. Suitable for engine parts, and harmless to copper, brass, aluminum, solder, lead, plastic, rubber, seals, wood or vinyl. Surface must remain wet for product to work. $40/gallon. | ||
| + | |||
(What about the converters that leave a "protective film" on the metal. They say that they don't need neutralization, and they don't need to be washed off. Is this as good as cleaning to bare metal, and then hitting with epoxy primer?) | (What about the converters that leave a "protective film" on the metal. They say that they don't need neutralization, and they don't need to be washed off. Is this as good as cleaning to bare metal, and then hitting with epoxy primer?) | ||
| − | |||
| − | ==== | + | ====Rust encapsulators==== |
| − | *[http://www.eastwoodco.com/shopping/product/detailmain.jsp?itemID= | + | *[http://www.eastwoodco.com/shopping/product/detailmain.jsp?itemID=1137&itemType=PRODUCT&iMainCat=373&iSubCat=374&iProductID=1137 Eastwood Rust Encapsulator] Manufacturer description: encapsulates rust and primes in one step. can be used under or over body fillers. compatible with most topcoats. $100/gallon. |
====Rust preventatives==== | ====Rust preventatives==== | ||
Your Privacy Choices