Editing Troubleshooting 4L60E transmissions

==Basic details on troubleshooting the 4L60E transmission==
It takes some working knowledge of the electronically controlled transmission to determine if the problem is engine, transmission or chassis related. Some general questions to be answered are:

*Does the speedometer function correctly?
*Does the in dash shifter indicator function correctly?
*Is the check engine light on?
*Has the system been scanned for codes and code history?

==Drivability problems==
Has the transmission lost reverse?  Has it also lost 2nd gear and 4th gear (overdrive)?

If those are the problems, suspect that the drive shell has broken or has stripped out splines.  When the drive shell fails, the results is no reverse, 2nd gear or 4th gear. Check for there being three complete shifts of the forward gears. Shift 1st to 2nd gear, then shift 2nd to 3rd gear, then shift 3rd to 4th gear (overdrive).

===Default operation===
3rd gear is all the transmission will have if there is no power to it. If the transmission has 1st gear, it has power to it and is allowed to have 1st gear by the ECM.

==Scanner==
A good quality scanner that can read codes, clear codes, and can read a live data stream as the transmission is controlled by the PCM is needed, not just a code reader device.   

Some scanners can take over control of the transmission for a better diagnostic test of the operation as the vehicle is driven. and then from there you can diagnose your problems  

==Valve body==
[[File:4L60EValveBodyExView1.jpg|500px]]

<br><br>

{{youcanedit}}
[[Category:GM]]
[[Category:Transmission]]
[[Category:Undeveloped articles]]
[[Category:Troubleshooting]]
[[Category:Undeveloped Troubleshooting articles]]
[[Category:Undeveloped Transmission articles]]