Transmission holding fixtures

From Crankshaft Coalition Wiki
Jump to: navigation, search
(Engine stand used to hold transmission)
 
Line 1: Line 1:
=Fixtures to hold automatic transmission for rebuild, inspection, storage.=
+
==Overview==
 
+
Fixtures to hold automatic transmissions for rebuild, inspection, or storage.
===GM transmissions===
+
 
+
  
 +
===Plastic bucket method===
 
A very simple method of using a plastic 5 gallon bucket with a flexplate on top.
 
A very simple method of using a plastic 5 gallon bucket with a flexplate on top.
  
Line 9: Line 8:
  
 
Set the transmission case on top of the flexplate.
 
Set the transmission case on top of the flexplate.
 
  
 
[[file:Trans_holding_bucket02.jpg]]
 
[[file:Trans_holding_bucket02.jpg]]
  
 
+
===Purpose built stand===
Photo shows a powerglide on a fixture that has pegs to slide into the hole for engine dowel pins.
+
Photo shows a Powerglide on a fixture that has pegs to slide into the hole for engine dowel pins.
  
 
[[file:GM_trans_holder.jpg]]
 
[[file:GM_trans_holder.jpg]]
Line 23: Line 21:
 
[[file:GM_trans_holder02.jpg]]
 
[[file:GM_trans_holder02.jpg]]
  
 +
<BR>
 +
 +
==Ford Automatics holder==
 +
 +
C-4 sits on old Mopar transmission case.
  
=Ford automatics=
 
  
C-4 trans sits on a broken Mopar case  for assembly
 
  
 
[[file:C4_trans_build.jpg]]
 
[[file:C4_trans_build.jpg]]
 +
 +
<br>
 +
 +
==Engine stand used to hold transmission==
 +
In cases where work is being done on the valve body or tailshaft and access to the front pump inward isn't necessary, an ordinary engine stand works well. The transmission case is bolted to the engine stand as though it were an engine. The transmission can then be rotated if needed and is at a comfortable level to work on standing up.
 +
 +
It's always a good idea to use large washers or plates having an equal thickness between the transmission and the engine stand to distribute the weight of the transmission from being concentrated at the bell housing bolt holes.
 +
[[File:FORD_C-6_ON_ENGINE_STAND.jpg|thumb|left|400px|Ford C-6 on engine stand]]
 +
<br style="clear: both" />
  
 
[[category: Transmission]]
 
[[category: Transmission]]
 +
[[Category:Tools]]

Latest revision as of 23:09, 2 December 2023

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox