The FREE T Bucket plans

Jump to: navigation, search
(Miscellaneous)
(Frame)
Line 23: Line 23:
  
 
==Frame==
 
==Frame==
Where you have essentially two body groups: '23-'25 and '26-'27, frame designs are all over the map. Many early Buckets were built on modified stock T frames or Model A frames. Others were built on early Chevy rails, or even channel iron frames. The "modern" T is usually sitting on a 2X3 or 2X4, .120-.180 wall thickness rectangular box tubing frame with a 2.5-3" tubular front cross member.
+
you can dodn loaf youngsters free T bucket plans here  .netquickposse.org/tbucketeers/Youngsters_T_Bucket_Frame_Plans  Where you have essentially two body groups: '23-'25 and '26-'27, frame designs are all over the map. Many early Buckets were built on modified stock T frames or Model A frames. Others were built on early Chevy rails, or even channel iron frames. The "modern" T is usually sitting on a 2X3 or 2X4, .120-.180 wall thickness rectangular box tubing frame with a 2.5-3" tubular front cross member.
  
 
Some frame makers make their frames one width front to back like a stock T frame, others have a frame that tapers from the rear to the front similar to a Model A frame. And others have other ideas.
 
Some frame makers make their frames one width front to back like a stock T frame, others have a frame that tapers from the rear to the front similar to a Model A frame. And others have other ideas.

Revision as of 08:42, 10 June 2011

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox