Talk:Transmission identification

Jump to: navigation, search

@@ Line 1: / Line 1: @@
+=TH350=
+==TH350 table note rendering==
 Crosley:
@@ Line 14: / Line 17: @@
 This is still an improvement over my original rendering.
+mmerlinn
+==TH350 12" tail housing (19 April 2010)==
+I have reverted the 12" tail housing addition to the TH350 table to the original version for the following reasons:
+:1)  All 12" tail housings I have ever seen were used on BPO versions of the TH350 and had a 2" speedo hole.  I know of none that were ever used with any other version of the TH350.  If any were, I would like to know make, model, and year of their use.
+:2)  All transmissions using the 12" tail housing were called "TH375B" by General Motors.  None were ever called "TH350."
+:3)  All TH375B transmissions were essentially identical to BPO TH350 transmissions except for the output shaft and tail housing.
+General Motors also had a transmission that they called the "TH375C" which was just a TH400 with a 27-spline output shaft.  I have no idea why GM had two TH375 transmissions, one based on the TH350 and the other based on the TH400.  Anything to add confusion to an already confusing array of transmissions.
 mmerlinn

Revision as of 02:41, 20 April 2010