TH400 rebuild tech
m (→Center support assembly) |
m (→Clearance in clutch packs:) |
||
| Line 8: | Line 8: | ||
*Direct and forward clutch drums: | *Direct and forward clutch drums: | ||
| − | + | .050" to .080" in each drum works well with 5 frictions. | |
| + | |||
Typically the thicker steel plates are used in the direct clutch drum. These can be mixed with thinner steels used in forward drum when setting clearance. | Typically the thicker steel plates are used in the direct clutch drum. These can be mixed with thinner steels used in forward drum when setting clearance. | ||
Try to maintain thicker steels in the direct clutch drum. Thicker steels take the heat of shifting better. | Try to maintain thicker steels in the direct clutch drum. Thicker steels take the heat of shifting better. | ||
| Line 14: | Line 15: | ||
*Intermediate clutch pack: | *Intermediate clutch pack: | ||
| − | + | .040" to .060" clearance in the intermediate clutch with 3 frictions. | |
| − | Always use a thicker snap ring | + | Always use a thicker snap ring .095" - .100" to retain the pressure plate |
===Full manual shift modifications=== | ===Full manual shift modifications=== | ||
Your Privacy Choices