TH400 rebuild tech
(→Full manual shift modifications) |
m (→Full manual shift modifications) |
||
| Line 22: | Line 22: | ||
There are two steel governor fluid tubes out the rear of the main valve body. Remove these tubes. Plug the holes in v-body. 3/8 x 16 tap and set screws work. Use liquid thread locking chemical | There are two steel governor fluid tubes out the rear of the main valve body. Remove these tubes. Plug the holes in v-body. 3/8 x 16 tap and set screws work. Use liquid thread locking chemical | ||
| − | [[image: | + | [[image:Gov_tube_holes.jpg]] |
A new hole in the proper place needs to be drilled (.110) to loop the governor fluid. Check photos here for location | A new hole in the proper place needs to be drilled (.110) to loop the governor fluid. Check photos here for location | ||
Your Privacy Choices