TH400 rebuild tech
(→Shift modifications) |
m (→Shift modifications) |
||
| Line 24: | Line 24: | ||
FULL manual shifts means just that. You must move the shifter for every shift up or down. NO Automatic shifts | FULL manual shifts means just that. You must move the shifter for every shift up or down. NO Automatic shifts | ||
| − | + | There are two steel governor fluid tubes out the rear of the main valve body. Remove these tubes. Plug the holes in v-body. 3/8 x 16 tap and set screws work. Use liquid thread locking chemical | |
[[image:400v-body6.jpg]] | [[image:400v-body6.jpg]] | ||
| + | A new hole in the proper place needs to be drilled (.110) to loop the governor fluid. Check photos here for location | ||
[[image:400v-body-7.JPG]] | [[image:400v-body-7.JPG]] | ||
Your Privacy Choices