TH350 rebuild tech
(Install foto that shows T-350 bushings, not power glide busings, also remove advertisement for TCI) |
m (→Low-reverse piston install) |
||
| Line 65: | Line 65: | ||
In the rare application that does not need reverse or low gear engine braking the low piston and low clutches can be deleted, and the feed holes in the case blocked. | In the rare application that does not need reverse or low gear engine braking the low piston and low clutches can be deleted, and the feed holes in the case blocked. | ||
| + | |||
Install new seals on the low piston, these are square cut seals, not lip seals. | Install new seals on the low piston, these are square cut seals, not lip seals. | ||
| Line 76: | Line 77: | ||
Then install the return spring and retainer using the tool pictured. | Then install the return spring and retainer using the tool pictured. | ||
[[file:TH350lowspringtool.jpg|frame|none| Tool used to compress the springs & retainer to install the retaining snap ring.]] | [[file:TH350lowspringtool.jpg|frame|none| Tool used to compress the springs & retainer to install the retaining snap ring.]] | ||
| + | |||
[[file:TH350caselowtool.jpg|frame|none|Spring compression tool installed into case.]] | [[file:TH350caselowtool.jpg|frame|none|Spring compression tool installed into case.]] | ||
Your Privacy Choices