TH350 rebuild tech
(→Direct drum assembly) |
(→T-350 Pump assembly) |
||
| Line 248: | Line 248: | ||
Intermediate piston installed. | Intermediate piston installed. | ||
| − | [[File:T-350_pump_n_piston.jpg|thumb|300px|left| | + | [[File:T-350_pump_n_piston.jpg|thumb|300px|left|T-350 pump with intermediate piston installed]]<br style="clear:both"/> |
| − | Sealing rings on the pump stator. Remove the second ring from the bottom if dual feeding. | + | Sealing rings on the T-350 pump stator. Remove the second ring from the bottom if dual feeding. |
[[File:T-350_stator_rings.jpg|thumb|300px|left|Sealing rings on pump]] <br style="clear:both"/> | [[File:T-350_stator_rings.jpg|thumb|300px|left|Sealing rings on pump]] <br style="clear:both"/> | ||
| Line 258: | Line 258: | ||
Pump gear install. Note the orientation of the tangs on the inner gear. They are offset. They should face away from the seal. Incorrect installation will result in pump failure and converter damage. | Pump gear install. Note the orientation of the tangs on the inner gear. They are offset. They should face away from the seal. Incorrect installation will result in pump failure and converter damage. | ||
| − | [[File:T-350_pump_half.jpg|thumb|300px|left|Notice inner pump gear tangs, they must be '''up''' as seen here]] <br style="clear:both"/> | + | [[File:T-350_pump_half.jpg|thumb|300px|left|Notice the T-350 inner pump gear tangs, they must be '''up''' as seen here]] <br style="clear:both"/> |
Your Privacy Choices