TH350 rebuild tech

Jump to: navigation, search
(external links are problems later , down road)
(external links can be problems later date)
Line 102: Line 102:
 
Then the planetary unit. Replace the bushing in this planet.
 
Then the planetary unit. Replace the bushing in this planet.
  
[[file:TH350planet.jpg]]
+
[[file:T-350planet.jpg]]
  
  
 
Now you can install the low/reverse clutches, beginning with a steel, then a friction, alternating, ending with a friction.
 
Now you can install the low/reverse clutches, beginning with a steel, then a friction, alternating, ending with a friction.
  
[[file:TH350lowclutchesinstalled.jpg]]
+
[[file:T-350lowclutchesinstalled.jpg]]
  
  
 
'''Note here:'''
 
'''Note here:'''
 
If you have a light duty core with low count low pack, unless it is a transbrake application or will be manually shifted into low for engine braking often, fewer clutches is OK. In some cases where you are after every last bit of ET, using fewer clutches can cause less frictional loss in 2nd and high gear. "Turbulator" steel plates from a 4L60E will also help and are a direct drop-in.
 
If you have a light duty core with low count low pack, unless it is a transbrake application or will be manually shifted into low for engine braking often, fewer clutches is OK. In some cases where you are after every last bit of ET, using fewer clutches can cause less frictional loss in 2nd and high gear. "Turbulator" steel plates from a 4L60E will also help and are a direct drop-in.
I am using Alto red frictions in this unit, however a stock tan clutch (I prefer Borg Warner) is more than adequate for even very high HP cars. A Hi-Energy Borg from a 4L60E is also a good choice.
+
I am using Alto red frictions in this unit, however a stock tan clutch ( like Borg Warner brand) is more than adequate for even very high HP cars. A Hi-Energy Borg from a 4L60E is also a good choice.
  
  
Line 133: Line 133:
  
 
[[file:TH350sungearbushings.jpg|frame|none|Double bushings installed. You MUST drill oil holes in bushings.]]
 
[[file:TH350sungearbushings.jpg|frame|none|Double bushings installed. You MUST drill oil holes in bushings.]]
 
  
 
==Install drive shell and front planetary unit==
 
==Install drive shell and front planetary unit==

Revision as of 00:04, 27 March 2012

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox