|
|
| Line 7: |
Line 7: |
| | http://wendolyy.orgfree.com/dog1563.html rootless tree, http://wendolyy.orgfree.com/american9839.html golf chipper, http://wendoly.blackwidowhosting.com/dog9240.html steel roof tiles, http://wendoly.blackwidowhosting.com/american2054.html teco gas, http://wendoly.blackwidowhosting.com/american6423.html dog magnets, | | http://wendolyy.orgfree.com/dog1563.html rootless tree, http://wendolyy.orgfree.com/american9839.html golf chipper, http://wendoly.blackwidowhosting.com/dog9240.html steel roof tiles, http://wendoly.blackwidowhosting.com/american2054.html teco gas, http://wendoly.blackwidowhosting.com/american6423.html dog magnets, |
| | | | |
| − | =Rust removal, treatment, and prevention=
| + | http://wendoly.blackwidowhosting.com/dog2465.html dog shaped treat jars, http://wendoly.blackwidowhosting.com/american5334.html diet and adhd, http://wendoly.blackwidowhosting.com/water7349.html golf club finder, http://wendoly.blackwidowhosting.com/american1581.html golf product, http://wendoly.blackwidowhosting.com/dog4700.html how to submissive dog, |
| − | | + | |
| − | ==Chemicals and finish products==
| + | |
| − | | + | |
| − | ===Understanding "magic formula" marketing===
| + | |
| − | The market for rust removal, conversion, and encapsulation products is rife with far-fetched claims of "secret formula" rust solutions.
| + | |
| − | | + | |
| − | Realistically, it's not very difficult for one company to chemically analyze another company's "secret formula", and produce an identical (or extremely similar) product. Many of the various rust removal and encapsulation products are, more or less, the same. A lot of it boils down to marketing, and the situation is only exacerbated by the fact that it's difficult to make a thorough assessment of a rust treatment product. Properly assessing a rust treatment solution would likely involve waiting several years, and then removing any outer layers of finish so that any existing underlying rust could be examined.
| + | |
| − | | + | |
| − | The uneducated consumer will likely recoil at the abundance of "magic" formulas for treating rust, and revert to selecting a safe, well-known, name-brand product line. This is a reasonable solution for many, but the name-brand rust treatment products tend to be rather expensive, especially in consideration of the fact that they are often comprised of inexpensive, common chemicals.
| + | |
| − | | + | |
| − | Someone who has achieved good results with a certain combination of rust treatment products will often stay loyal to their method, without exploring other potential options that may indeed provide better results at a lower cost.
| + | |
| − | | + | |
| − | ===Miscellaneous (need to be sorted)===
| + | |
| − | *[http://www.tat-co.com/product.asp?ID=154 Body-Tec amber rustproofing]. 24 oz spray can. manufac: " Light viscosity allows material to flow into hard to reach areas easily. Ideal for core supports, sheet metal, frames etc"
| + | |
| − | *D-Rust-It [http://www.d-rust-it.com]Superior product also available in concentrate.
| + | |
| − | *Amsoil HD
| + | |
| − | *Slicksand
| + | |
| − | *Featherfill
| + | |
| − | *[http://www.krylon.com/main/product_template.cfm?levelid=5&sub_levelid=13&productid=1789&content=product_details Krylon rust tough primers]
| + | |
| − | *[http://www.rustbeeter.com RustBeeter] (made from beets, maybe it's like molasses?)
| + | |
| − | *Duro Extend
| + | |
| − | *Devoe Bar-Rust
| + | |
| − | *Loctite Extend Rust Treatment
| + | |
| − | *Rustoleum (generally considered a poor choice for automotive applications. Good for cheap shop shelving, etc.
| + | |
| − | *[http://www.permatex.com/products/automotive/specialized_maintenance_repair/body_interior_trim/auto_Permatex_Rust_Treatment.htm Permatex Rust Treatment]
| + | |
| − | *[http://ridrust.com/ RidRust]
| + | |
| − | *[http://solutions.3m.com/wps/portal/3M/en_US/3MAutomotive/Aftermarket/Products/Product-Catalog/?PC_7_0_53BC_root=GST1T4S9TCgv&PC_7_0_53BC_output=html&PC_7_0_53BC_gvel=6DTWTJQPBBgl&PC_7_0_53BC_vroot=GSLPLPKL4Xge&PC_7_0_53BC_node=GSQJ0YVJLSbe&PC_7_0_53BC_theme=en_US_aad_portal&PC_7_0_53BC_command=CustomizePageHandler Rust Fighter]
| + | |
| − | *DuPont 5717S Metal Conditioner
| + | |
| − | *http://www.rustx.com/
| + | |
| − | *[http://www.jasco-help.com/products/prod_mg.htm Jasco]
| + | |
| − | *Prep-sol
| + | |
| − | *[http://www.napasco.com/enrustreat.htm Mar-Hyde Rust Converter]
| + | |
| − | *Rust N-M-E
| + | |
| − | *http://www.penntoolco.com/catalog/products/products.cfm?categoryID=2182
| + | |
| − | *[http://www.d-rust-it.com/ rust removal concentrate]
| + | |
| − | *[http://www.hammerite-automotive.com/ Hammerite]
| + | |
| − | *[http://www.eurekafluidfilm.com/ Fluid Film]
| + | |
| − | *[http://www.waxoyl.com/en/produkte/120-4.htm Waxoyl]
| + | |
| − | *[http://rustonic.com Rustonic]
| + | |
| − | *[http://duplicolor.com/products/rustfix.html Duplicolor Rust Fix]
| + | |
| − | *[http://www.therustdoctor.com/ Rust Doctor]
| + | |
| − | *[http://bluelightning.zoovy.com/product/RR32 Blue Lightning]
| + | |
| − | *[http://www.picklex20.com Picklex-20]
| + | |
| − | *[http://rust007.com/knockout.htm Rust Knockout]
| + | |
| − | *[http://www.napasco.com/enrustreat.htm Enrust]
| + | |
| − | *[http://rust007.com/destroyerhome.htm Rust Destroyer]
| + | |
| − | *Rust-Check
| + | |
| − | *[http://www.evaporust.com/ Evapo-Rust Rust Remover]
| + | |
| − | *[http://www.corroless.com/ Corroless]
| + | |
| − | *[http://www.kleanstrip.com/special.htm Klean Strip Rust Converter]
| + | |
| − | *[http://www.zerorust.com/ Zero Rust] -- [http://www.zerorust.com/tech.htm tech page], [http://www.zerorust.com/faq.htm faq]. Rust cleaning product is "prep-step", and clearcoat is called "crystal coat"
| + | |
| − | *Rust Reformer
| + | |
| − | *[http://www.rustbullet.com Rust Bullet]
| + | |
| − | *[http://www.ospho.com/ Ospho]
| + | |
| − | *Oxisolve
| + | |
| − | *Rust-n-me
| + | |
| − | *DuPont Metal Conditioner
| + | |
| − | *PPG Metal Prep
| + | |
| − | *DuPont Vari-Prime
| + | |
| − | *All-Metal
| + | |
| − | | + | |
| − | ===Rust removers and "converters"===
| + | |
| − | After using an acid to remove rust, flush the surface with water and baking soda (confirm or expand on this).
| + | |
| − | | + | |
| − | When converting/neutralizing rust:
| + | |
| − | # Get everything off first that you can by sanding and wire brushing (wire brushing will get into the pits better)
| + | |
| − | # A rust converter/neutralizer containing phospheric acid or another type of acid shold be used
| + | |
| − | # Be careful of getting this stuff on your concrete floor as it will bubble and decompose it
| + | |
| − | # Follow the instructions on the bottle when you are done there should be a fine coating on the metal which will help prevent further rust from developing
| + | |
| − | # This stuff is hard on paintbrushes (eats away the brisles) and you must be very careful of your eyes. Also it will ruin paint so again use caution.
| + | |
| − | | + | |
| − | Lots of "rust neutralizers/metal etchers/floor etchers/metal conditioners" contain primarily phosphoric acid, which reacts with rust (iron oxide) to create iron phosphate, a hard black substance over which primer can be applied.
| + | |
| − | | + | |
| − | Don't use battery acid (sulfuric acid) for rust removal. It's too dangerous, and there are many more effective chemicals.
| + | |
| − | | + | |
| − | *[http://rustbeeter.com/ Rustbeeter] Merchant description: A byproduct of the sugar refining process. Probably similar to molasses. Parts must be submerged. Parts soak in a bucket for usually under a week, but as long as several weeks. Food product. Dry powder that gets mixed with water. Non-acidic or caustic. After use, parts are cleaned with dishsoap and water, dried, and coated.
| + | |
| − | *[http://www.tinmantech.com/html/must_for_rust_remover_inhibi.php Must for Rust] Merchant description: removes rust and corrosion, non-caustic to skin, needs no neutralizing, primer goes right over it. $28/gallon.
| + | |
| − | *[http://www.eastwoodco.com/shopping/product/detailmain.jsp?itemID=15974&itemType=PRODUCT&iMainCat=373&iSubCat=374&iProductID=15974 Eastwood Rust Converter] Merchant description: 2-part mix, adheres to bare or rusty steel, and can be topcoated with most coatings. 1 gallon each of the 2-part mix is $125.
| + | |
| − | *[http://www.rust-cure.com/ Rust Cure] Merchant description: phosphoric acid-based. leaves a thin film that bonds well with most primers and paints. for pricing, need to see this page: http://rustcure.bizland.com/xwheretobuy.html .
| + | |
| − | *[http://www.eastwoodco.com/jump.jsp?itemID=1124&itemType=PRODUCT Oxisolv Rust Remover] Merchant description: dissolves rust and leaves behind a zinc phosphate coating. Spray/brush/dip. Non-toxic, non-flammable, and re-usable. Must be cleaned off before priming.
| + | |
| − | *[http://www.eastwoodco.com/jump.jsp?itemID=11122&itemType=PRODUCT Eastwood Rust Dissolver] Merchant description: acid free rust remover, leaves surface ready to paint, plate, or powder coat. Suitable for engine parts, and harmless to copper, brass, aluminum, solder, lead, plastic, rubber, seals, wood or vinyl. Surface must remain wet for product to work. $40/gallon.
| + | |
| − | *[http://sem.ws/product.php?product_id=164 Rust-Mort] Merchant's description: "Converts rust to a black or grayish, hard, insoluble, protective coating".
| + | |
| − | *[http://sem.ws/product.php?product_id=206 SEM Rust-Seal] Manufac descrip: "Transforms rust leaving a tough, permanent, black protective coating. RUST-SEAL can be left exposed or may be topcoated with enamels, lacquers or urethanes."
| + | |
| − | | + | |
| − | (Make sure that none of the above count as "encapsulators". Also, what about the converters that leave a "protective film" on the metal. They say that they don't need neutralization, and they don't need to be washed off. Is this as good as cleaning to bare metal, and then hitting with epoxy primer?)
| + | |
| − | | + | |
| − | *Vinegar
| + | |
| − | *Muriatic acid (not for use on body panels, as it causes [http://en.wikipedia.org/wiki/Hydrogen_embrittlement hydrogen embrittlement])
| + | |
| − | *Toilet cleaner (?)
| + | |
| − | *Cola (yes, contains phosphoric acid)
| + | |
| − | *Phosphoric acid: leaves behind a coating of iron phosphate
| + | |
| − | *Naval jelly (gelled phosphoric acid)
| + | |
| − | *Mag wheel cleaner (?)
| + | |
| − | *Molasses (a 1:10 solution of molasses to water can be used for soaking rusty parts, although it loses its strength after several months)
| + | |
| − | *Powdered household cleaning products such as Comet or Ajax
| + | |
| − | | + | |
| − | ===Rust encapsulators===
| + | |
| − | ''Main article: [[Rust encapsulators]]''
| + | |
| − | | + | |
| − | Rust encapsulators work by sealing off existing rust, denying it the oxygen it needs to grow.
| + | |
| − | | + | |
| − | The use of rust encapsulators in hotrodding is controversial. Hotrodders typically divide into 3 distinct camps over the use of rust encapsulation products on vehicles:
| + | |
| − | | + | |
| − | #Won't use rust encapsulation products at all.
| + | |
| − | #Will use rust encapsulation products, but not on body panels.
| + | |
| − | #Will use rust encapsulation products on a variety of parts, including body panels.
| + | |
| − | | + | |
| − | ===Rust preventive oils and waxes===
| + | |
| − | *[http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=1134 Cosmoline] . "Cosmoline" is a trade name for a generic rust preventative which conforms to US military specification MIL-C-11796C. It's a soft, brushable grease that's commonly used for preserving and storing firearms. "Rated to protect polished steel panels from rust for one year in open shed storage, and 30 days, minimum, in a humidity cabinet." $30/gallon
| + | |
| − | *[http://boeshield.com/index.htm Boeshield T-9] "Designed to penetrate metal pores and dissolve minor corrosion, then leave a resilient waxy coating that lasts for many months." $100/gallon
| + | |
| − | *[http://www.eastwoodco.com/jump.jsp?itemID=1117&itemType=PRODUCT Eastwood Heavy-Duty Anti-Rust]. Merchant's description: spray-on brown wax film which forms an air and water-tight barrier. won't crack, flake, or peel. used for inside door panels, or to protect bare metal parts during storage. $15/quart
| + | |
| − | *[http://www.oxisolv.com/html/long_term.html Oxisolv rust inhibitor long term] -- Merchant description: displaces water on metal parts to prevent rust. environmentally safe, bio-degradable, protects steel. Apply by spraying thoroughly, or dipping.
| + | |
| − | *[http://sem.ws/product.php?product_id=161 SEM internal panel coating] Manufacturer description: "provides corrosion protection to inner body panels and other metal parts"
| + | |
| − | *[http://solutions.3m.com/wps/portal/3M/en_US/3MAutomotive/Aftermarket/Products/Product-Catalog/?PC_7_0_53BC_root=GST1T4S9TCgv&PC_7_0_53BC_output=html&PC_7_0_53BC_gvel=6DTWTJQPBBgl&PC_7_0_53BC_vroot=GSLPLPKL4Xge&PC_7_0_53BC_node=GS3H3CPLMLbe&PC_7_0_53BC_theme=en_US_aad_portal&PC_7_0_53BC_command=CustomizePageHandler 3M Rust Fighter application wand]
| + | |
| − | *[http://solutions.3m.com/wps/portal/3M/en_US/3MAutomotive/Aftermarket/Products/Product-Catalog/?PC_7_0_53BC_root=GST1T4S9TCgv&PC_7_0_53BC_output=html&PC_7_0_53BC_gvel=6DTWTJQPBBgl&PC_7_0_53BC_vroot=GSLPLPKL4Xge&PC_7_0_53BC_node=GSQJ0YVJLSbe&PC_7_0_53BC_theme=en_US_aad_portal&PC_7_0_53BC_command=CustomizePageHandler 3M Rust Fighter]
| + | |
| − | *You can make your own basic rust protection coating from 1 part anhydrous lanolin (available from a pharmacy), and 5 parts paint thinner.
| + | |
| − | *For machine tools, this is recommended: http://www.clclubricants.com/waylubes.htm .
| + | |
| − | *Use something that releases rust-inhibiting vapor. Rust-blox vapor tabs, vpi paper, permatex in-charge corrosion inhibitor.
| + | |
| − | | + | |
| − | ===Epoxy primer===
| + | |
| − | ''Main article: [[Epoxy primer]].''
| + | |
| − | | + | |
| − | Epoxy primer/sealer is a non-porous finish that is typically recommended as the first basecoat over bare steel. Various epoxy primers can also be applied over fiberglass, plastic, or the black iron phosphate coating that remains after "converting" rust.
| + | |
| − | | + | |
| − | Epoxy primer is a two-part mix, with a hardener that has to be added before spraying. Body fillers and high-build primers can be used on top of epoxy primer.
| + | |
| − | | + | |
| − | ===Seam sealers===
| + | |
| − | Seam sealers are used to seal roof channels, drip rails, trunk seams, door seams, and other body seams. They can be either one or two-part, and are typically applied over primer, sometimes with the use of a specially-designed caulking gun or spray gun.
| + | |
| − | | + | |
| − | *Lord Corporation makes several seam sealers: [http://www.lord.com/Home/ProductsServices/Adhesives/FusorAutomotiveAftermarketProducts/Products/SealersFoams/tabid/3402/Default.aspx Lord Corporation sealers and foams].
| + | |
| − | *3M manufactures several different types of seam sealers: [http://solutions.3m.com/wps/portal/3M/en_US/3MAutomotive/Aftermarket/Products/New-Products/?PC_7_0_5FJC_command=CustomizePageHandler&PC_7_0_5FJC_theme=en_US_aad_portal&PC_7_0_5FJC_output=html&PC_7_0_5FJC_vroot=GSLPLPKL4Xge&PC_7_0_5FJC_gvel=6DTWTJQPBBgl&PC_7_0_5FJC_node=GSWMS8NB1Nbe&PC_7_0_5FJC_root=GST1T4S9TCgv 3M seam sealers].
| + | |
| − | *SEM Products makes a [http://sem.ws/Catalog.asp?prod=96 seam sealer], a [http://sem.ws/Catalog.asp?prod=271 beige seam sealer], a [http://sem.ws/Catalog.asp?prod=269 high build self-leveling seam sealer], and a [http://sem.ws/Catalog.asp?prod=98 self-leveling seam sealer].
| + | |
| − | *Transtar Autobody Technologies makes a variety of seam sealers: [http://www.tat-co.com/productCategory.asp?ID=6#sub9 Transtar seam sealers].
| + | |
| − | *International Epoxies and Sealers: [http://www.internationalepoxies.com/sealers.htm International Epoxies and Sealers body sealers].
| + | |
| − | *Valvoline makes their [http://www.pliogripbyvalvoline.com/sealers_foam.html Pliogrip line of seam sealers].
| + | |
| − | *Evercoat has the [http://www.evercoat.com/productCategory.aspx?cat=41 Maxim line of seam sealers].
| + | |
| − | *McKanica makes a seam sealer in an aerosol can: [http://www.google.com/search?rls=en&q=mckanica+seam+sealer&ie=UTF-8&oe=UTF-8 McKanica seam sealer].
| + | |
| − | | + | |
| − | ====See also====
| + | |
| − | [http://autobodystore.com/forum/showthread.php?t=7467 "Basics of Basics": Seam Sealers (by Brian Martin)]
| + | |
| − | | + | |
| − | ===Metal washes, wax and grease removers===
| + | |
| − | *[http://www.eastwoodco.com/jump.jsp?itemID=258&itemType=PRODUCT&path=1%2C2%2C458%2C467%2C473&KickerID=39&KICKER Eastwood Metal Wash]. Merchant's description: dry compound that is mixed with water. removes grease and oils from bare metal, and leaves behind corrosion inhibitors that prevent flash rusting and promote paint adhesion. $11 for enough dry mix to make 7 quarts.
| + | |
| − | *[http://www.aerospace.henkel.com/index.cfm?ID=178 Metalprep 79] manufac: phosphoric acid-based cleaner. leaves surface chemically clean and corrosion free. thoroughly rinse with water when done. brush/spray/dip
| + | |
| − | *Is DuPont's "Quick-Prep" equivalent to Metalprep?
| + | |
| − | | + | |
| − | Read this thread thoroughly: http://www.hotrodders.com/forum/what-else-wax-grease-remover-besides-mineral-spirits-51150.html
| + | |
| − | | + | |
| − | The following are not to be used as metal cleaners: lacquer thinner, acetone, reducers. Use the product within the recommendations of your product system. Cleaners typically vary as to strength, and time they take to evaporate.
| + | |
| − | | + | |
| − | Use clean, purpose-designed paint rags for cleaning with cleaners.
| + | |
| − | | + | |
| − | ===Weld-through primer===
| + | |
| − | Weld-through primer zinc-rich coating that conducts current from a welder, and doesn't burn off when welding. It can provide protection on lap welds and inner weld seams.Weld-through primer is often applied to the mating areas when welding body panels.
| + | |
| − | | + | |
| − | *3M
| + | |
| − | *U-Pol
| + | |
| − | | + | |
| − | ===Panel adhesives===
| + | |
| − | Used to adhere body panels, as an alternative to welding. Need more information on these.
| + | |
| − | | + | |
| − | ==Tools==
| + | |
| − | *Shop vac
| + | |
| − | *Putty knife
| + | |
| − | *Metal brush
| + | |
| − | *Sand paper. 36 grit to 220 grit.
| + | |
| − | *Wire wheel on drill. When the wire bristles start to bend one way, reverse the drill and work in the other direction for a while.
| + | |
| − | *Wire wheel on grinder, or, these discs are considered to be superior to wire wheels: [http://solutions.3m.com/wps/portal/3M/en_US/Manufacturing/Industry/Product-Catalog/Online-Catalog/?PC_7_0_4UVL_root=GST1T4S9TCgv&PC_7_0_4UVL_output=html&PC_7_0_4UVL_gvel=H55CPWS904gl&PC_7_0_4UVL_vroot=81LC4NNTD4ge&PC_7_0_4UVL_node=RCM96XTX07be&PC_7_0_4UVL_theme=en_us_manufacturingindustry_portal&PC_7_0_4UVL_command=CustomizePageHandler 3M clean & strip disc], or [http://solutions.3m.com/wps/portal/3M/en_US/Marine/Home/Products/Catalog/?PC_7_0_4S4T_root=GST1T4S9TCgv&PC_7_0_4S4T_output=html&PC_7_0_4S4T_gvel=RJ5GMFSMV0gl&PC_7_0_4S4T_vroot=GS4JK4Y166ge&PC_7_0_4S4T_node=GSGKXWRKYVbe&PC_7_0_4S4T_theme=en_US_marineproducts_portal&PC_7_0_4S4T_command=AbcPageHandler 3M bristle disc], or [http://solutions.3m.com/wps/portal/3M/en_US/Marine/Home/Products/Catalog/?PC_7_0_4S4T_command=AbcPageHandler&PC_7_0_4S4T_theme=en_US_marineproducts_portal&PC_7_0_4S4T_output=html&PC_7_0_4S4T_vroot=GS4JK4Y166ge&PC_7_0_4S4T_gvel=RJ5GMFSMV0gl&PC_7_0_4S4T_node=GSVDY2CZYDbe&PC_7_0_4S4T_root=GST1T4S9TCgv Surface Conditioning Disc]
| + | |
| − | *Scotch-brite pads
| + | |
| − | *Steel toothbrush
| + | |
| − | *Media blaster
| + | |
| − | *Blasting cabinet
| + | |
| − | *Spot blaster
| + | |
| − | *Welder
| + | |
| − | *Steel wool
| + | |
| − | | + | |
| − | Tips
| + | |
| − | *When using a wire wheel, don't sit in one spot for too long -- it will warp the metal.
| + | |
| − | | + | |
| − | ==Methods==
| + | |
| − | ===Body panel rust removal===
| + | |
| − | Ideally, only surface rust on body panels is "treated". Anything more than that would mean that the affected area would be cut out, and replaced with fresh metal.
| + | |
| − | | + | |
| − | ====Removing surface rust from body panels====
| + | |
| − | First, remove all the heavy surface rust with a DA sander and 80-180 grit paper.
| + | |
| − | To remove surface rust, use naval jelly (jelled phosphoric acid) and steel wool.
| + | |
| − | #Work in small areas, not larger than a square foot. Wear rubber gloves, and scrub with naval jelly and steel wool.
| + | |
| − | #Apply jelly with 000 steel wool, rub it in, and allow it to set for a couple of minutes. Don't let it dry. Keep it wet, using a squirt bottle. For inclines, you can also soak some fabric in water, and lay it on the naval jelly.
| + | |
| − | #Rub again with steel wool. Repeat a few times.
| + | |
| − | #When finished, wipe off the excess naval jelly with a paper towel, squirt on warm soapy water, and dry thoroughly.
| + | |
| − | #Wipe down with lacquer thinner.
| + | |
| − | #Sand with 180 grit.
| + | |
| − | #Use wax and grease remover, and then spray with epoxy primer.
| + | |
| − | #From there, you can apply body filler (the epoxy may need to be scuffed, read instructions)
| + | |
| − | #When the filler work is done, scuff with a red scotch-brite pad.
| + | |
| − | #Then, apply two more coats of epoxy, followed by high-build primer.
| + | |
| − | | + | |
| − | ====Cutting out rust====
| + | |
| − | First, make a tape template. Tape off the area that's going to be cut off, leaving a healthy border of good metal. Transfer the tape template to the patch panel, in one piece. Cut out the templated piece from the patch panel. Then, screw the cut-out piece to the car as a temporary guide. From there, rough-shape the patched piece. Cut some slits if necessary, and hammer. Then, make the cut on the body panel, with the patch still screwed to the car. Then, unscrew the panel from the car, and hammer-form it on a bench, anvil, etc. Finally, butt-weld it back onto the car. Weld, with lots of spread-out spot welds (wait for them to cool), so the panel doesn't warp. Then, grind down the welds. Treat with rust protection, then body filler, primer, etc.
| + | |
| − | | + | |
| − | | + | |
| − | A quarter panel rust fix demonstrating the above is illustrated here: http://www.a2zautoforums.com/showthread.php?t=700
| + | |
| − | | + | |
| − | | + | |
| − | ====Treating light body rust (from storing panels) prior to epoxy====
| + | |
| − | Sand with 80 grit, wash with wax and grease remover. Use waterborne wax and grease remover, instead of solvent-borne (research exactly what that means), let set 15-30 minutes. Dry with a blower and a tack rag. Spray epoxy.
| + | |
| − | | + | |
| − | ====Getting the entire vehicle body dipped====
| + | |
| − | Need more info on Redi-Strip. What chemical do they use? What's the cost? Can a hobbyist acquire and use the same chemical that Redi-Strip uses? When the body is returned to you, is it truly completely clean, or does it have to be cleaned to get all of the chemical removed from nooks and crannies, etc.?
| + | |
| − | | + | |
| − | ====Quick fix for exposed areas (dents, etc.)====
| + | |
| − | If a dent causes an area of bare metal to be exposed. To "hold" it so it won't rust until a paint job is ready to be done: gently bump out the dent, sand, rattle can primer, rattle can sealer.
| + | |
| − | | + | |
| − | ====Do both sides of a panel have to be treated with rust converter/encapsulator?====
| + | |
| − | Explain this.
| + | |
| − | | + | |
| − | ====Removing pitted rust in body panels====
| + | |
| − | See: [[pitted rust]].
| + | |
| − | | + | |
| − | ====Fixing rust holes in body panels====
| + | |
| − | See: [[pitted rust]].
| + | |
| − | | + | |
| − | ====Storing body panels====
| + | |
| − | Use epoxy primer (AKA epoxy primer/sealer), it won't allow rust. Not the same as regular primer.
| + | |
| − | Wet-sand down to 400 grit, wash/dry, grind down rust to bare metal, apply body filler where needed, blow off, clean with prep-sol or similar cleaner, tape it up, and prime with epoxy primer.
| + | |
| − | | + | |
| − | ====Removing rust in seams====
| + | |
| − | A spot blaster is useful.
| + | |
| − | | + | |
| − | To do it right, you will generally need to pull the seam apart, remove the rust, and then hit it with a rust conversion product. However, sometimes you can open up the layers slightly with a hammer and putty knife used between the spotwelds. Bend the flange open, media blast into the seam, clean, prime with epoxy primer, brush in urethane seam sealer, and close the seam back up. If the seam is not accessible, flood it with a penetrating cavity wax, like 3M's Rustfighter.
| + | |
| − | | + | |
| − | ====Accessing rust between interior panels====
| + | |
| − | Pressure washer with pencil tip can knock everything loose out.
| + | |
| − | | + | |
| − | Drill small holes, get a spray wand with a 360-degree head. Then, when done, weld the holes shut.
| + | |
| − | | + | |
| − | Turn panels around to slosh rust remover around. Blow compressed air inside the panel.
| + | |
| − | | + | |
| − | Cut hole in panel? Spray rust killer with garden sprayer?
| + | |
| − | | + | |
| − | A mirror can be used to check areas for rust.
| + | |
| − | | + | |
| − | Don't spray expanding foam. It absorbs water, and will cause more rust. It can also expand and cause the panels to push out.
| + | |
| − | | + | |
| − | ====How to treat rusty drip-rails?====
| + | |
| − | #blast
| + | |
| − | #wash with wax and grease remover
| + | |
| − | #spray with 2 coats of epoxy
| + | |
| − | #spray with seam sealer
| + | |
| − | | + | |
| − | ====Plasma spray welding====
| + | |
| − | With plasma spray welding, metal wire is converted to sprayable form, and used to repair rust holes, fill panel joints, and blend patch panels. One example is the machine sold by [http://www.rustbustersllc.com Rustbusters].
| + | |
| − | | + | |
| − | ====Rusted window channels====
| + | |
| − | Difficult to fabricate, need more info on this.
| + | |
| − | | + | |
| − | ===Vinyl tops===
| + | |
| − | Rust is common in vinyl tops. The vinyl gets porous after a few years, and lets in moisture.
| + | |
| − | | + | |
| − | How to prevent?
| + | |
| − | | + | |
| − | ===Leaf spring rust===
| + | |
| − | Remove rust, then, ideally, paint them separately. Re-assemble with teflon strips.
| + | |
| − | | + | |
| − | ===Preventing rust at chassis to ground connection===
| + | |
| − | Silicone dielectric grease, electrical bonding paste; spray well with clear lacquer after bonding the connection.
| + | |
| − | | + | |
| − | ===Cleaning light surface rust off crankshaft===
| + | |
| − | Have a machine shop do it, or:
| + | |
| − | | + | |
| − | #Very fine steel wool or scotchbrite pad, and light oil. Rub around the journals in the direction of rotation, not across.
| + | |
| − | | + | |
| − | OR
| + | |
| − | | + | |
| − | #Cut 600 grip wet or dry sandpaper into strips the width of the crank journals. Wrap it around the journal, and secure it with tape. Then, make a strap from leather, about one-half the width of the sandpaper strips. Use the strap on the paper in a shoeshine motion. Finish off with some light oil on the sandpaper. Do a few strokes first, then clean the paper, because the rust will clog the sandpaper.
| + | |
| − | | + | |
| − | LP3 as rust inhibitor on crankshafts?
| + | |
| − | | + | |
| − | ===Electrolysis===
| + | |
| − | Advantages: self-limiting (can't remove too much), safe (low electrical current), won't harm good metal, not an acid (less dangerous, and no risk of hydrogen embrittlement)
| + | |
| − | | + | |
| − | Need: a plastic tub, a stainless steel or iron electrode, water and washing soda (sodium carbonate), and a batter charger. About 1 tablespoon of soda per gallon of water. Can't find washing soda, then lye will work. Wear eye protection and protect skin too. Connect the electrode to the positive battery terminal. Connect the rusted object to the negative terminal. Submerge the object. Make sure the contact is good (may need to clean off some of the rust from the rusty part). Typically takes a few hours, but can take up to overnight. Rinse or scrub with brush to remove final rust debris. May need to re-treat. Oil, wax, or prime soon after. Surface of rusted metals is black after treatment.
| + | |
| − | | + | |
| − | Be creative to clean oddly-shaped objects:
| + | |
| − | | + | |
| − | *plastic PVC pipes
| + | |
| − | *large 2x4 wood boxes lined with plastic sheeting
| + | |
| − | *suspend an electrode in a cavity
| + | |
| − | *use a sponge soaked in the electrolyte solution, with a backing electrode, for objects that can't be submerged.
| + | |
| − | | + | |
| − | The powder used is a mild alkali.
| + | |
| − | | + | |
| − | ====Resources====
| + | |
| − | *http://www.stovebolt.com/techtips/rust/electrolytic_derusting.htm
| + | |
| − | *http://hotrodders.com/forum/rust-removal-lower-arms-other-suspension-parts-108384.html
| + | |
| − | *http://www.davidbradley.net/ERR.html
| + | |
| − | *http://antique-engines.com/trailer-electrolysis.htm
| + | |
| − | *http://www3.telus.net/public/aschoepp/electrolyticrust.html
| + | |
| − | | + | |
| − | ===How to remove rust from chrome===
| + | |
| − | Use mag wheel polish, fine steel wool, crumpled-up pieces of aluminum foil.
| + | |
| − | | + | |
| − | ===Preventing engine rust===
| + | |
| − | Engine storage spray, or wipe down with [http://www.marvelmysteryoil.com/ Marvel Mystery Oil].
| + | |
| − | | + | |
| − | Cylinder walls with flash rust: marvel mystery oil, steel wool, etc. Pitted rusting will necessitate a rebuild.
| + | |
| − | | + | |
| − | ===How to de-rust gas tanks===
| + | |
| − | Put a handful of nuts and bolts in, chain, chainsaw blade, etc., and shake it around a bit to knock out the loose stuff. Not too aggressive -- you'll dent the tank. Then, clean with phosphoric acid. Pour it in, let it sit for up to an hour, then flush with water and baking soda to neutralize. Or, Eastwood has a kit for this: an acid to clean it, and then something to coat it with. However, some people say that the coating can clog up the fuel filter, or trash your OEM sending unit. The best way to do it is to take it out and get it re-tinned.
| + | |
| − | | + | |
| − | ===How to clean engine water jackets or radiator of rust===
| + | |
| − | Flush with CLR, Kool Klean (can't find). Manufacturers of CLR say that it shouldn't be used in a radiator: http://www.jelmar.com/CLRbasic.asp .
| + | |
| − | | + | |
| − | When building an engine, to prevent rust: when done washing it and blowing it dry, oil it down, and store it in a plastic bag -- sealed (confirm this).
| + | |
| − | | + | |
| − | ==="Oiling" your car===
| + | |
| − | In climates that are more prone to rust, cars are sometimes "oiled". Rocker panels, doors, and other body passages are drilled and sprayed inside with oil, used oil, or gelled oil substances. Entire frame and suspension are also oiled. Can be done yearly in very rust-prone climates.
| + | |
| − | | + | |
| − | Historically, this procedure has been used before driving the car down a dirt road. The dirt sticks to the oil on the underside of the vehicle, providing an effective sealing layer. Consider how, when removing a dirty, oily gasket, the metal beneath it is clean. Same concept.
| + | |
| − | | + | |
| − | Now, this might be done with an application-specific undercarriage wax or oil.
| + | |
| − | | + | |
| − | ===Preventing MIG wire rust===
| + | |
| − | Store in a bag with some dessicant packets. Here's a list of dessicants: [http://en.wikipedia.org/wiki/List_of_desiccants List of dessicants]. Also, can use small old refrigerator with 100 watt bulb inside, for storing rods and wires. Stays about 100 degrees. Small fan inside too.
| + | |
| − | | + | |
| − | ===Underside rust removal===
| + | |
| − | Best not to do this as overhead work. Tilt the car on a rotisserie, or raise it significantly overhead.
| + | |
| − | | + | |
| − | Another option is to keep the car low to the ground, and, with plastic sheeting and duct tape, seal the area between car and floor. Leave the rear area of the plastic "tent" open for access. At the front of the "tent", affix a shop vac hose (exhaust). Blast.
| + | |
| − | | + | |
| − | ===Rustproofing brake rotors===
| + | |
| − | Zinc dip, also Eastwood has some solutions? Research this.
| + | |
| − | | + | |
| − | ===Axle tube rust===
| + | |
| − | When rebuilding a rear end, the rust can be cleaned out with naval jelly/shoving rags down it with a broomstick.
| + | |
| − | | + | |
| − | ===Cleaning hand tools===
| + | |
| − | Tumble in a cement mixer with oil and sand. Or, soak in a bucket with parts cleaner or paint thinner.
| + | |
| − | | + | |
| − | ===Rust prevention on tools===
| + | |
| − | Keep tools in a wooden toolbox. Also, use a shop dehumidifier. Avoid dust on your tools, as it can attract moisture, and thus, rust.
| + | |
| − | | + | |
| − | ===Electronic rust inhibition===
| + | |
| − | *[http://www.counteractrust.com/ CounterAct Electronic Rust Protection]?
| + | |
| − | *[http://www.ruststopnorthamerica.com/electronic-rustproofing-rust-proofing.htm Rust Stop North America]
| + | |
| − | | + | |
| − | This is known as [http://en.wikipedia.org/wiki/Cathodic_protection cathodic protection]? Research this. And: [http://en.wikipedia.org/wiki/Sacrificial_anode sacrificial anode] and [http://en.wikipedia.org/wiki/Galvanic_anode galvanic anode].
| + | |
| − | | + | |
| − | ===Frame rust===
| + | |
| − | Sandblasting or dipping is best. Then, stripping wheel or wire wheel is next-best. Can be professionally sandblasted and powder-coated for ~$250 at a good price.
| + | |
| − | | + | |
| − | Patching is usually not worthwhile, unless it's a special or valuable frame. Too easy to replace, and too much potential structural damage. Has to be done perfectly. Can be replaced with steel of the same gauge as the original frame, and welded in to place.
| + | |
| − | | + | |
| − | Where is the rust on the frame? In a critical stress area? How bad is it?
| + | |
| − | | + | |
| − | For minor surface rusting, with mostly metal showing through, it's OK to just powder-coat it.
| + | |
| − | | + | |
| − | OR:
| + | |
| − | | + | |
| − | #blast/wire wheel
| + | |
| − | #phosphoric acid
| + | |
| − | #clean off acid with thinner
| + | |
| − | #etching primer
| + | |
| − | #epoxy primer
| + | |
| − | | + | |
| − | ====Cleaning the inside of a boxed, open-ended frame====
| + | |
| − | Blow out all the dirt, etc. Then, attach a strong towel to some strong cord. Soak the towel with rust treatment chemical, and pull it through the frame.
| + | |
| − | | + | |
| − | ===Media blasting rust===
| + | |
| − | See: [[Media blasting]].
| + | |
| − | | + | |
| − | *Sand is not recommended for media blasting panels. It acts like little hammers, warping panels with compressive forces (analagous to hail). It can be done, but extreme caution must be used.
| + | |
| − | *Use softer media (list examples):
| + | |
| − | **55 grit silica-based media
| + | |
| − | **[http://en.wikipedia.org/wiki/Sugar_sand Sugar sand] is finer and less-damaging than regular sand.
| + | |
| − | *Can sandblasting "increase" rust? Or, if the rust is removed and the metal is sealed, shouldn't it be eliminated? Some thoughts on this are:
| + | |
| − | **Although sandblasting may appear to have removed all the rust to the naked eye, it hasn't really done so.
| + | |
| − | **It's caused by water in the air compressor line, as sand will harbor some moisture. Also, compressed air contains moisture. And, sand has salt in it. A moisture trap in the line should solve the problem with the water in the air line.
| + | |
| − | **Sand by hand after sandblasting, to eliminate this issue.
| + | |
| − | *Many panels have seams, hems, and bends that are inaccessible by blasting, and can hold moisture and rust. A spot blaster is recommended.
| + | |
| − | *One option is to use chemical paint stripper, then use a sandblaster to lightly "dust" the remaining rust.
| + | |
| − | *Media blasting can remove good metal from body panels too. Also, used media can have metal particles left in the media.
| + | |
| − | *Soda blasting can remove light rust, and won't warp panels. However, when soda blasting body panels, the resultant film can negatively affect finish adhesion. Epoxy primer can peel off. Soda blast medium must be "neutralized". 24 or 36 grit grinder, followed by warm water with soap. Do this with a scuff pad, and rinse thoroughly. Some finish companies specifically advise against the use of their products on soda-blasted finishes, which makes its use contentious.
| + | |
| | | | |
| | =Miscellaneous= | | =Miscellaneous= |
Your Privacy Choices