Replacing the fuel pump in a small-block Chevy engine
m (Reverted edits by 98.23.224.189 (Talk) to last revision by 216.64.156.5) |
|||
Line 23: | Line 23: | ||
Once the fuel pump mounting bolts are started, tighten them evenly (one side then the other) until the pump meets the spacer. | Once the fuel pump mounting bolts are started, tighten them evenly (one side then the other) until the pump meets the spacer. | ||
− | DO NOT forget to remove the longer bolt holding the push rod. Replace the original bolt into the same hole, with a little sealer on the threads | + | DO NOT forget to remove the longer bolt holding the push rod. Replace the original bolt into the same hole, with a little sealer on the threads. |
Reattach the fuel lines- do not use teflon tape. | Reattach the fuel lines- do not use teflon tape. | ||
[[Category:Engine]] | [[Category:Engine]] |