Removing stuck fasteners

Jump to: navigation, search
(References)
Line 13: Line 13:
 
* Whatever system you use, once you have a hold of the bolt,stud, or whatever, try rocking it forward and reverse a little at a time. If you can get it to move, it is more likely to come out. An older mechanic said always try to tighten a little before you loosen. Remember, if it moves, you are half way home. Also, brake fluid works great as a penetration oil.
 
* Whatever system you use, once you have a hold of the bolt,stud, or whatever, try rocking it forward and reverse a little at a time. If you can get it to move, it is more likely to come out. An older mechanic said always try to tighten a little before you loosen. Remember, if it moves, you are half way home. Also, brake fluid works great as a penetration oil.
 
If she ain't glowing, she ain't going
 
If she ain't glowing, she ain't going
 +
 +
==Tighten, then loosen==
 +
In some cases, simply tightening the fastener and then loosening it will do the trick.
  
 
==Smack it with a hammer==
 
==Smack it with a hammer==

Revision as of 00:39, 31 March 2008

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox