Removing stuck fasteners
From Crankshaft Coalition Wiki
(Clean up) |
(→References) |
||
| Line 102: | Line 102: | ||
**[http://www.crcindustries.com/auto/content/prod_detail.aspx?PN=05330&S=Y Ultra Screwloose] | **[http://www.crcindustries.com/auto/content/prod_detail.aspx?PN=05330&S=Y Ultra Screwloose] | ||
*Diesel fuel | *Diesel fuel | ||
| + | *[https: //www.lawsonproducts .com/Drummond/Open-and-Shut-Nut-and-Bolt-Loosener-and-Rust-Penetrant/DA6152.lp Drummond Open and Shut]<ref>https: //www.hotrodders .com/forum/best-penetrating-lubricant-147009.html#post1033340</ref> | ||
| + | *[https: //www.lawsonproducts .com/Drummond/Open-and-Shut-NutBolt-LoosenerRust-Penetrant/DA7671.lp Drummond Open and Shut]<ref>https: //www.hotrodders .com/forum/best-penetrating-lubricant-147009.html#post1033340</ref> | ||
*[http://www.lubecorp.com/products/excel_440_super_lubricant.html Excel 440 Super Lubricant] | *[http://www.lubecorp.com/products/excel_440_super_lubricant.html Excel 440 Super Lubricant] | ||
*[http://www.bilthamber.com/ferrosol.html Ferrosol] | *[http://www.bilthamber.com/ferrosol.html Ferrosol] | ||
| Line 118: | Line 120: | ||
*Paraffin wax | *Paraffin wax | ||
*[http://pbblaster.com/store/moreinfo.cfm?Product_ID=1 PB Blaster] | *[http://pbblaster.com/store/moreinfo.cfm?Product_ID=1 PB Blaster] | ||
| + | *[http://www.plusgas.co.uk/ PlusGas] | ||
*[http://www.ronsonstore.com/multilube.aspx Ronson Multi-Lube] | *[http://www.ronsonstore.com/multilube.aspx Ronson Multi-Lube] | ||
*[http://www.schaefferoil.com/specialty/190_Penetro.html Schaeffer Penetro 90] | *[http://www.schaefferoil.com/specialty/190_Penetro.html Schaeffer Penetro 90] | ||
| Line 177: | Line 180: | ||
*Hotrodders forum thread on the [http://www.hotrodders.com/forum/does-work-grabit-seen-tv-155731.html "GrabIt"] extractor tool, as seen on a late-night infomercial. | *Hotrodders forum thread on the [http://www.hotrodders.com/forum/does-work-grabit-seen-tv-155731.html "GrabIt"] extractor tool, as seen on a late-night infomercial. | ||
[[File:Sockets 003.jpg|thumb|left|300px|Damaged or frozen fastener removal sockets]]<br style="clear:both"/> | [[File:Sockets 003.jpg|thumb|left|300px|Damaged or frozen fastener removal sockets]]<br style="clear:both"/> | ||
| + | *A rubber band placed between a stripped screwhead and a screwdriver can help get enough grip on the remaining metal. | ||
| + | *If you're removing the remains of a broken zerk fitting/grease nipple, then a cheap Philips head screwdriver can be hammered in sufficiently to grip the hollow barrel and unscrew like normal. | ||
===Instructions for making an impact-type screw removal tool=== | ===Instructions for making an impact-type screw removal tool=== | ||
| Line 211: | Line 216: | ||
*Whatever system you use, once you have a hold of the fastener, try rocking it forward and reverse a little at a time. If you can get it to move, it is more likely to come out. An older mechanic said always try to tighten a little before you loosen. Remember, if it moves, you are half way home. | *Whatever system you use, once you have a hold of the fastener, try rocking it forward and reverse a little at a time. If you can get it to move, it is more likely to come out. An older mechanic said always try to tighten a little before you loosen. Remember, if it moves, you are half way home. | ||
*Use the largest cobalt drill bit (that just covers the ID of the nut) to drill through the nut- parallel to the bolt- then used a chisel to turn/peel the nut off of the bolt. | *Use the largest cobalt drill bit (that just covers the ID of the nut) to drill through the nut- parallel to the bolt- then used a chisel to turn/peel the nut off of the bolt. | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Your Privacy Choices