Rebuild an alternator
(→Disassembly) |
Andromeda451 (Talk | contribs) m (→Removal and Clean up) |
||
| Line 10: | Line 10: | ||
== Removal and Clean up == | == Removal and Clean up == | ||
| + | * disconnect the vehicle battery, If you have a charger put it on charge during the rebuild. This will help to improve battery life and minimize the load on the fresh alternator after rebuilding. | ||
| − | + | *Remove the alternator from the car | |
| − | *Remove | + | |
*Get about 2 or 3 cans of gunk, go to the coin wash, spray it with the gunk, then let it soak 5 minutes... THEN set the wash to degrease, spray that for 5 minutes. Follow this with a rinse for 5 to 10 minutes. If available follow with a final rinse of distilled water to eliminate any chance of mineral salts causing issues down the road. Allow dry time OR better yet air blow dry.. | *Get about 2 or 3 cans of gunk, go to the coin wash, spray it with the gunk, then let it soak 5 minutes... THEN set the wash to degrease, spray that for 5 minutes. Follow this with a rinse for 5 to 10 minutes. If available follow with a final rinse of distilled water to eliminate any chance of mineral salts causing issues down the road. Allow dry time OR better yet air blow dry.. | ||
Your Privacy Choices