Rebuild an alternator
(→Installation and Inspection) |
(→Installation and Inspection) |
||
| Line 30: | Line 30: | ||
| − | * Install your new bearing, but before you do, get a SMALL sharp punch and carefully put a dimple in the race each 1/3 rd the way around. This will prevent the Bearing from EVER spinning in the race. It will be a tiny bit harder to put the cases back together, you have to tap the halves with a rubber mallet. | + | * Install your new bearing, but before you do, get a SMALL sharp punch and carefully put a dimple in the race each 1/3 rd the way around. This will prevent the Bearing from EVER spinning in the race. It will be a tiny bit harder to put the cases back together, you might have to tap the halves with a rubber mallet. |
* Install the bushing. (depends on kit) | * Install the bushing. (depends on kit) | ||
Your Privacy Choices