Editing Porting cylinder heads
Line 1: | Line 1: | ||
==Preamble== | ==Preamble== | ||
− | The purpose of this article is to acquaint engine builders to the possible benefits of cylinder head porting and making more power through the porting process. | + | The purpose of this article is to acquaint engine builders to the possible benefits of cylinder head porting and making more power through the porting process. |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
==Areas to work on== | ==Areas to work on== | ||
Line 14: | Line 9: | ||
When a port is machined for a seat, often a lip is left below the seat. This lip is sometimes semi-removed using a type of tapered reamer that helps smooth the transition from the seat into the pocket portion of the port. But because this is done quickly and by machine and not carefully and by hand, there is still almost always places where improvements can be made. | When a port is machined for a seat, often a lip is left below the seat. This lip is sometimes semi-removed using a type of tapered reamer that helps smooth the transition from the seat into the pocket portion of the port. But because this is done quickly and by machine and not carefully and by hand, there is still almost always places where improvements can be made. | ||
− | [[File:EXH PORT.jpg|thumb|400px|left| Arrows indicate lip left after the machining process. This needs to | + | [[File:EXH PORT.jpg|thumb|400px|left| Arrows indicate lip left after the machining process. This needs to me carefully removed so the transition from the seat to the pocket is smooth.]] <br style="clear:both"/> |
Line 34: | Line 29: | ||
===Gasket matching=== | ===Gasket matching=== | ||
− | This is a simple process whereby we will match thermostat housing to an intake manifold for better flow of coolant from the engine to the radiator. Begin by cleaning off the surface of both housing and intake mating surfaces. Remove all gasket material and glue with acetone and a gasket scraper. True the surface of slight imperfections by using a mill/bastard file place flat on the gasket surface working the file back and forth. The shiny | + | This is a simple process whereby we will match thermostat housing to an intake manifold for better flow of coolant from the engine to the radiator. Begin by cleaning off the surface of both housing and intake mating surfaces. Remove all gasket material and glue with acetone and a gasket scraper. True the surface of slight imperfections by using a mill/bastard file place flat on the gasket surface working the file back and forth. The shiny sports are the highs and the dull ones are the lows, true these surfaces. When a flat surface is obtained,paint the surface with Dykem dye, lay a new gasket on the surface and insert the bolts in the holes of the intake to center the gasket over the openings. With a scribe, scratch along the gasket edge around the opening. When complete, remove bolts and gasket. This will reveal a scribed line in the purple dye that you will be enlarging up the opening to. |
*If this is an aluminum intake, chuck up a open cut burr that is used for aluminum, and spray it with WD40 or similar lubricant. This will make cleaning the tool easier, reduce friction and heat. | *If this is an aluminum intake, chuck up a open cut burr that is used for aluminum, and spray it with WD40 or similar lubricant. This will make cleaning the tool easier, reduce friction and heat. |