Pilot bearing and bushings
Eloc431962 (Talk | contribs) |
Eloc431962 (Talk | contribs) |
||
| Line 5: | Line 5: | ||
So as anytime when doing these changes be safe and have the vehicle properly secured when lifted in the air, If you do not have a lift. | So as anytime when doing these changes be safe and have the vehicle properly secured when lifted in the air, If you do not have a lift. | ||
Be sure to use the proper jack stands for the weight of the vehicle in question, And if possible have someone there with you while performing the work. | Be sure to use the proper jack stands for the weight of the vehicle in question, And if possible have someone there with you while performing the work. | ||
| − | Please do not place vehicle on blocks of wood or concrete blocks. and if possible and you have access to a transmission stand use it by all means. ( VEHICLE NEED TO BE ON A GOOD LEVEL SURFACE ) | + | Please do not place vehicle on blocks of wood or concrete blocks. |
| + | and if possible and you have access to a transmission stand use it by all means. ( VEHICLE NEED TO BE ON A GOOD LEVEL SURFACE ) | ||
After the transmission has been removed and cleared from the vehicle and you will remove the flexplate/flywheel. | After the transmission has been removed and cleared from the vehicle and you will remove the flexplate/flywheel. | ||
Then if you look at the end od the crankshaft you will see the bushing it is where the shaft of the transmission will ride when installed. | Then if you look at the end od the crankshaft you will see the bushing it is where the shaft of the transmission will ride when installed. | ||
Your Privacy Choices