Milling cylinder heads

From Crankshaft Coalition Wiki

Jump to: navigation, search

@@ Line 159: / Line 159: @@
      </tr></table>
-<br>
-==Intake flange angles==
-For those who would prefer to calculate it for themselves, the table below gives the intake flange angles. The amounts shown are how much difference there is from 90 degrees between the flange and deck. The flange angles listed below may be used with the following formula:
-;Amount to be removed from intake flange = .707 ÷ (SIN (45 - intake face angle))
-The table was copied without permission from my web site. sales@victorylibrary.com
 <br>
 ==Another way to calculate the amount to remove==

Latest revision as of 22:32, 3 March 2015