Intake manifold
(Add text) |
m (→Using early intake on later (non Vortec) heads) |
||
| Line 145: | Line 145: | ||
[[File:VORTEC INTAKE BOLTS.jpg|thumb|left|]] <br style="clear:both"/> | [[File:VORTEC INTAKE BOLTS.jpg|thumb|left|]] <br style="clear:both"/> | ||
| − | + | ==Using early intake on later (non Vortec) heads== | |
On the 1986-back heads and intakes, the center four bolts were the same angle as the other bolts. 1987-up use a different 72 degree angle except for Corvette aluminum heads. To compensate, spacer/washers can be made or [http://www.holley.com/90748.asp '''bought'''] to allow the intake to fit. | On the 1986-back heads and intakes, the center four bolts were the same angle as the other bolts. 1987-up use a different 72 degree angle except for Corvette aluminum heads. To compensate, spacer/washers can be made or [http://www.holley.com/90748.asp '''bought'''] to allow the intake to fit. | ||
Your Privacy Choices