How to run Ford wheels on a Chevy wheel pattern
(→Bolt Pattern Adapters) |
|||
| Line 72: | Line 72: | ||
==Bolt Pattern Adapters== | ==Bolt Pattern Adapters== | ||
| − | These can be found on eBay for relatively cheap (30- | + | Bolt pattern adapters normally fit between the rotor and the wheel. The adapters usually come with pressed in lugs for the new bolt pattern, with a lug length of about 1.5". |
| + | These can be found on eBay for relatively cheap ($30-50USD per wheel+ shipping) in various materials and thicknesses. Note that you'll need to consider the offset/backspacing of your wheels, and factor in the adapter spacing. When you change how far the wheel centerline is away from the hub, you can (adversely) change the handling of your car. If the centerline is too far out, bump steer can become more noticeable and the life of your wheel bearings can be affected. Match the adapter thickness to your wheel backspacing to your intended suspension geometry. | ||
The adapters currently on the market range in thickness from 20mm to 3 inches. | The adapters currently on the market range in thickness from 20mm to 3 inches. | ||
[http://www.ebay.com/sch/i.html?_nkw=5x120+5x4.5+adapter&_sacat=0&_odkw=5x120+5x114.3+adapter&_osacat=0 5x120 to 5x4.5 adapters on eBay] | [http://www.ebay.com/sch/i.html?_nkw=5x120+5x4.5+adapter&_sacat=0&_odkw=5x120+5x114.3+adapter&_osacat=0 5x120 to 5x4.5 adapters on eBay] | ||
| + | |||
| + | One thing to consider with really thin adapters (20mm and 1 inch) is that the existing lugs on your hub may be longer than that. If the wheels you are putting on have hollow space in between the lug holes, the existing lugs may protrude into those holes (that's OK). If they don't have space for the old lugs to protrude into, you may have to shorten the lugs by sawing off the appropriate amount. If your are using thicker adapters, this should not be a problems since the old lugs will be completely covered by the adapter. | ||
==Things to consider== | ==Things to consider== | ||
Your Privacy Choices