Editing How to choose a SBC engine
Line 2: | Line 2: | ||
− | * 262 CI: Used in 1975, low hp, smog engine designed for reliability with high MPG. Only used with the Chevrolet Nova and Monza (with 4.3L badges when optioned with the Monza) - NOT to be confused with the 1985-2014 4.3L V6-90 which has the bore/stroke of the SBC 350 | + | * 262 CI: Used in 1975, low hp, smog engine designed for reliability with high MPG. Only used with the Chevrolet Nova and Monza (with 4.3L badges when optioned with the Monza) - NOT to be confused with the 1985-2014 4.3L V6-90 which has the bore/stroke of the SBC 350. |
− | * 265 CI: Chevrolet's first SBC. Far surpassed in performance by the 283 and 327 engines that came shortly after. Consider this one for restorations only (unless you like a challenge) | + | * 265 CI: Chevrolet's first SBC. Far surpassed in performance by the 283 and 327 engines that came shortly after. Consider this one for restorations only (unless you like a challenge). |
− | * 267 CI: Used from 1978-1981, low hp, smog engine designed for reliability with high MPG | + | * 267 CI: Used from 1978-1981, low hp, smog engine designed for reliability with high MPG. |
* 283 CI: Chevy's first engine to produce 1hp per CI. Provides hp in the higher RPM, good for [[Reducing vehicle weight|light cars]] and higher RPM in performance applications. | * 283 CI: Chevy's first engine to produce 1hp per CI. Provides hp in the higher RPM, good for [[Reducing vehicle weight|light cars]] and higher RPM in performance applications. | ||
* 301 CI: This is a 0.125" overbored SBC 283, it needs a block with thick cylinder walls (recommend sonic testing first) and is no longer recommended (or necessary) practice, instead the preferred method is to use a 350 block and a 283 crank with spacer bearings if you want to build one. Actual displacement is 301.6 cid. | * 301 CI: This is a 0.125" overbored SBC 283, it needs a block with thick cylinder walls (recommend sonic testing first) and is no longer recommended (or necessary) practice, instead the preferred method is to use a 350 block and a 283 crank with spacer bearings if you want to build one. Actual displacement is 301.6 cid. |