Hot rodding the HEI distributor
(Remove MSD spam/AD) |
(→Ignition interrupter switch: add text, link) |
||
| Line 65: | Line 65: | ||
To use the interrupter, the switch is depressed (or toggled, depending on the design) and the engine is cranked via the key/starter switch. Once the engine is turning over, the switch is released. This powers up the ignition and the engine will start without kickback. | To use the interrupter, the switch is depressed (or toggled, depending on the design) and the engine is cranked via the key/starter switch. Once the engine is turning over, the switch is released. This powers up the ignition and the engine will start without kickback. | ||
| + | |||
| + | ====Using a relay==== | ||
| + | A relay that delays the ignition from being energized- giving the starter time to get the engine turning over- can be wired into the ignition feed wire. These relays may be found from any number of suppliers, one is [http://www.wolstentech.com/index.php Wolsten Tech] out of New Jersey. | ||
====Starter brace==== | ====Starter brace==== | ||
Your Privacy Choices