Freeing a stuck engine

Jump to: navigation, search
(Unsticking an Engine in a Manual Transmission Vehicle)
Line 59: Line 59:
 
I have had success in unsticking an engine in vehicles on a number of occasions buy using the pre-soaking methods mentioned above for a long period.
 
I have had success in unsticking an engine in vehicles on a number of occasions buy using the pre-soaking methods mentioned above for a long period.
 
Once the engine has soaked I jack up one drive wheel, put the transmission in high gear and work the wheel back and forth.  
 
Once the engine has soaked I jack up one drive wheel, put the transmission in high gear and work the wheel back and forth.  
This can take quite a while and it is quit tiring but you will notice the wheel will start to move a little farther if the process is going to succeed.
+
This can take quite a while and it is quite tiring but you will notice the wheel will start to move a little farther if the process is going to succeed.
once I can get the drive wheel to rotate several revolutions I like to pull the vehicle in high gear several miles with all the plugs removed. This is probably not necessary but I like to think that it gets everything lubricated up good.
+
Once I can get the drive wheel to rotate several revolutions I like to pull the vehicle in high gear several miles with all the plugs removed. This is probably not necessary but I like to think that it gets everything lubricated up good.

Revision as of 00:06, 22 September 2008

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox