Ford engine specifications

Jump to: navigation, search
(Ford MEL Series)
(Ford FE Series)
Line 227: Line 227:
 
Bore and stroke of 4.00X3.30  
 
Bore and stroke of 4.00X3.30  
  
two-barrell @ 240 hp  
+
two-barrel @ 240 hp  
  
1958 series option w/four-barrell @ 265 hp  
+
1958 series option w/four-barrel @ 265 hp  
  
 
mechanical camshaft w/machined combustion chambers  
 
mechanical camshaft w/machined combustion chambers  
Line 242: Line 242:
 
engine for the '58 T-bird  
 
engine for the '58 T-bird  
  
four barrell carb @ 300 hp  
+
four barrel carburetor @ 300 hp  
  
 
compression ratio 10.2.:1  
 
compression ratio 10.2.:1  
Line 278: Line 278:
 
Three versions available  
 
Three versions available  
  
1961-1963: 390 cubic inch with 9.6:1 compression ratio, four barrell carb @300 hp.  
+
1961-1963: 390 cubic inch with 9.6:1 compression ratio, four barrel carburetor @300 hp.  
  
  
Line 298: Line 298:
 
This is a 390 block with a 428 crankshaft  
 
This is a 390 block with a 428 crankshaft  
  
Four barrell carb.  
+
Four barrel carburetor.  
  
 
The stroke is increased .020 in for a total of 3.98 inches  
 
The stroke is increased .020 in for a total of 3.98 inches  
Line 318: Line 318:
 
Cast aluminum intake manifolds.  
 
Cast aluminum intake manifolds.  
  
Single and dual four barrell carburators.  
+
Single and dual four barrel carburetors.  
  
 
Horsepower varied from 410 to 425 depending on setup.  
 
Horsepower varied from 410 to 425 depending on setup.  
Line 340: Line 340:
 
Introduce in 1964  
 
Introduce in 1964  
  
Tallest cyclinder ports and intake manifold allowed for greater air/fuel mixture  
+
Tallest cylinder ports and intake manifold allowed for greater air/fuel mixture  
  
Single and dual four barrell
+
Single and dual four barrel carburetors
  
 
Cast iron crank  
 
Cast iron crank  
Line 355: Line 355:
 
Available in 1967  
 
Available in 1967  
  
Options included Tunnel Port cyclinder heads, four barrell aluminum intake or dual four barrell aluminum intake.  
+
Options included Tunnel Port cylinder heads, four barrel aluminum intake or dual four barrel aluminum intake.  
  
 
Much like the 427 medium riser in all other regards.  
 
Much like the 427 medium riser in all other regards.  
Line 364: Line 364:
 
Available as an over the counter option only.  
 
Available as an over the counter option only.  
  
Cast aluminum cyclinder heads  
+
Cast aluminum cylinder heads  
  
hemi-spherical combusiton chambers  
+
hemispherical combustion chambers  
  
 
stainless steel valves  
 
stainless steel valves  
Line 406: Line 406:
  
 
Internal structure differences included Lemans type cap screw rods  
 
Internal structure differences included Lemans type cap screw rods  
The capscrews were shorter than the 427's to clear the block  
+
The cap screws were shorter than the 427's to clear the block  
  
 
Externally balanced  
 
Externally balanced  

Revision as of 10:23, 23 September 2008

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox