Ford C4 transmissions

Jump to: navigation, search

Revision as of 11:42, 25 September 2011 (edit) Crosley (Talk \| contribs) ← Older edit		Revision as of 13:09, 9 October 2011 (edit) (undo) Crosley (Talk \| contribs) m (→Main case prep work) Newer edit →
Line 19:		Line 19:

	Rear side of main case. This photo shows the placement of the parking pawl , pin and spring for the pawl.		Rear side of main case. This photo shows the placement of the parking pawl , pin and spring for the pawl.
		+
		+	Notice the fresh bushing installed in the case. Good idea to replace the bushing. While the bushing is out, check the oil return hole for size or restrictions. Often builders drill the oil return hole larger about 30% than the OEM hole. About .200 or .210 drill bit size works well

Revision as of 13:09, 9 October 2011