First paint job

Jump to: navigation, search
(How to mix and spray Urethane Enamel)
(How to mix and spray Urethane Enamel)
Line 112: Line 112:
 
== How to mix and spray Urethane Enamel ==
 
== How to mix and spray Urethane Enamel ==
  
FIRST OFF: URETHANE ENAMELS, WHEN MIXED, ARE VERY TOXIC TO HUMANS. You MUST wear a VOC compliant repirator at minimum when using these type of paints. A fresh air system is recommended, as is a painter's suit. They omit Volatle Organic Compounds, which are deadly the the human liver. DO NOT try to paint at home without an approved resirator, at the minimum. Ask your paint salesperson which one to buy. 3M makes a good one for under $20.
+
FIRST OFF: URETHANE ENAMELS, WHEN MIXED, ARE VERY TOXIC TO HUMANS. You MUST wear a VOC compliant repirator at minimum when using these type of paints. A fresh air system is recommended, as is a painter's suit. These paints omit Volatle Organic Compounds, which are deadly the the human liver. DO NOT try to paint at home without an approved respirator, at the minimum. Ask your paint salesperson which one to buy. 3M makes a good one for under $20.
  
 
Urethane enamel comes in two forms: Single stage, and Base coat/Clear coat. Single stage is the easiest to use, simply mix the two parts together, (The paint and the hardener) then reduce to spray and go at it. The single stage paint like the base/clear, dries chemically by cross-linking together at a molecular level. Old lacquer paints and the Dupli-Color stuff at the local auto parts store dry by evaporation of solvent leaving the paint behind. Uretahnes are MUCH stronger, as the name implies, they leave a urethane (plastic) coating on the car. Much better then old technology like lacquer.
 
Urethane enamel comes in two forms: Single stage, and Base coat/Clear coat. Single stage is the easiest to use, simply mix the two parts together, (The paint and the hardener) then reduce to spray and go at it. The single stage paint like the base/clear, dries chemically by cross-linking together at a molecular level. Old lacquer paints and the Dupli-Color stuff at the local auto parts store dry by evaporation of solvent leaving the paint behind. Uretahnes are MUCH stronger, as the name implies, they leave a urethane (plastic) coating on the car. Much better then old technology like lacquer.

Revision as of 21:56, 25 October 2008

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox