Finding vacuum leaks

Jump to: navigation, search
m (Undo revision 12800 by 220.199.184.27 (Talk))
Line 1: Line 1:
asianscreens forum
+
{{youcanedit}}
http://s1.shard.jp/galeach/new127.html
+
There are several methods for locating vacuum leaks. Occasionally, you may experience a vacuum leak into the intake ports from the crankcase of the motor due to the intake manifold / cylinder head interface not being machined parallel. No amount of propane or carburetor cleaner will find such a leak. The best way is to insure the elimination of such a problem while building the motor. See the wiki article: [[Manifold/Head vacuum leak, internal]].
mrchewsasianbever.com
+
 
(http://s1.shard.jp/galeach/new127.html)
+
=Propane method=
asia ex japan http://s1.shard.jp/galeach/new127.html
+
 
pretty asian girls
+
#Get a soldering propane tank and valve attachment.
(http://s1.shard.jp/galeach/new127.html)
+
#Unscrew the end of it so you have a threaded pipe without the nozzle.
pictures of canberra australia
+
#Attach a 2 foot piece of hose to the end.
http://s1.shard.jp/losaul/ozone-therapy-australia.html
+
#Start the engine and let it warm up a bit.
british passport australian
+
#Turn on the propane and run the hose all around the vacuum lines and the bottom of the carb.
(http://s1.shard.jp/losaul/ozone-therapy-australia.html)
+
#If the engine smooths out or revs up a bit, you have found your leak.
sanity music store australia
+
 
http://s1.shard.jp/losaul/ozone-therapy-australia.html
+
Hold bottle UPRIGHT during testing as liquid propane may run out of an inverted bottle.
australia car hire uk
+
 
(http://s1.shard.jp/losaul/ozone-therapy-australia.html)
+
PLEASE do this in a well ventilated area due to propane gas and exhaust fumes!!
map http://s1.shard.jp/olharder/autoroll-654.html
+
 
map (http://s1.shard.jp/olharder/autoroll-654.html)
+
Fixing a leak. My old neighbor built circle track cars and after the ran the engine  he would shut it off...tape off every opening with duct tape then put a hose over the dip stick and hook up to a vacuum source. He would then get his stethascope and listen in the area where the propane or carb fluid indicated a leak. he used Rtv and calked into the area until the stethascope whistle stopped. too much vacuum will pull too much calk into the hole.
links http://s1.shard.jp/olharder/autoroll-654.html
+
 
webmap (http://s1.shard.jp/olharder/autoroll-654.html)
+
=Carburetor cleaner method=
southafricanairlines
+
#With the car running, using a can of carburetor cleaner spray down the hoses and vacuum connections.
http://s1.shard.jp/frhorton/lwp18cwan.html
+
#Notice a change in the running of the engine and you might have found your leak.
distances between towns in south africa
+
 
  (http://s1.shard.jp/frhorton/lwp18cwan.html)
+
[[Category:Engine]]
smithsonian african art
+
  http://s1.shard.jp/frhorton/lwp18cwan.html
+
africa aids blocked in (http://s1.shard.jp/frhorton/lwp18cwan.html)
+
african american black magazine man site web
+
http://s1.shard.jp/frhorton/q7wm62r24.html
+
john africa move
+
(http://s1.shard.jp/frhorton/q7wm62r24.html)
+
coverderm south africa
+
http://s1.shard.jp/frhorton/q7wm62r24.html
+
sasol ltd south africa
+
(http://s1.shard.jp/frhorton/q7wm62r24.html)
+

Revision as of 18:59, 26 May 2009

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox