Finding vacuum leaks

Jump to: navigation, search
m (Undo revision 12911 by 200.36.161.206 (Talk))
Line 1: Line 1:
product to get scratches of of auto glass
+
{{youcanedit}}
http://s1.shard.jp/olharder/comparatif-automobile.html
+
There are several methods for locating vacuum leaks. Occasionally, you may experience a vacuum leak into the intake ports from the crankcase of the motor due to the intake manifold / cylinder head interface not being machined parallel. No amount of propane or carburetor cleaner will find such a leak. The best way is to insure the elimination of such a problem while building the motor. See the wiki article: [[Manifold/Head vacuum leak, internal]].
<a href="http://s1.shard.jp/olharder/comparatif-automobile.html">auto rv michigan
+
 
</a>
+
=Propane method=
[url=http://s1.shard.jp/olharder/comparatif-automobile.html]grand thefth auto san andreas
+
 
[/url]
+
#Get a soldering propane tank and valve attachment.
[link=http://s1.shard.jp/olharder/comparatif-automobile.html]automotive radio advertising
+
#Unscrew the end of it so you have a threaded pipe without the nozzle.
[/link]
+
#Attach a 2 foot piece of hose to the end.
ball dresses australia
+
#Start the engine and let it warm up a bit.
http://s1.shard.jp/losaul/police-federation.html
+
#Turn on the propane and run the hose all around the vacuum lines and the bottom of the carb.
<a href="http://s1.shard.jp/losaul/police-federation.html">gove australia map
+
#If the engine smooths out or revs up a bit, you have found your leak.
</a>
+
 
[url=http://s1.shard.jp/losaul/police-federation.html]australian public service code of conduct
+
Hold bottle UPRIGHT during testing as liquid propane may run out of an inverted bottle.
[/url]
+
 
[link=http://s1.shard.jp/losaul/police-federation.html]rams home loan australia
+
PLEASE do this in a well ventilated area due to propane gas and exhaust fumes!!
[/link]
+
 
url http://s1.shard.jp/olharder/autoroll-654.html
+
Fixing a leak.  My old neighbor built circle track cars and after the ran the engine he would shut it off...tape off every opening with duct tape then put a hose over the dip stick and hook up to a vacuum source. He would then get his stethascope and listen in the area where the propane or carb fluid indicated a leak. he used Rtv and calked into the area until the stethascope whistle stopped. too much vacuum will pull too much calk into the hole.
<a href="http://s1.shard.jp/olharder/autoroll-654.html">sitemap</a>
+
 
[url=http://s1.shard.jp/olharder/autoroll-654.html]http[/url]
+
=Carburetor cleaner method=
[link=http://s1.shard.jp/olharder/autoroll-654.html]domain[/link]
+
#With the car running, using a can of carburetor cleaner spray down the hoses and vacuum connections.
bayard capital of australia
+
#Notice a change in the running of the engine and you might have found your leak.
http://s1.shard.jp/losaul/australia-day.html
+
 
<a href="http://s1.shard.jp/losaul/australia-day.html">ingersoll rand australia
+
[[Category:Engine]]
</a>
+
[url=http://s1.shard.jp/losaul/australia-day.html]accommodation australia rental western
+
[/url]
+
[link=http://s1.shard.jp/losaul/australia-day.html]news western australia
+
[/link]
+
antivirus gratuit online
+
  http://s1.shard.jp/bireba/antivirus-2004.html
+
<a href="http://s1.shard.jp/bireba/antivirus-2004.html">avg antivirus crack serial
+
</a>
+
[url=http://s1.shard.jp/bireba/antivirus-2004.html]panda antivirus program
+
[/url]
+
[link=http://s1.shard.jp/bireba/antivirus-2004.html]clamshell antivirus
+
[/link]
+

Revision as of 09:58, 31 May 2009

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox