Finding vacuum leaks

Jump to: navigation, search
m (Undo revision 12885 by 200.36.161.206 (Talk))
Line 1: Line 1:
australian embassies in africa
+
{{youcanedit}}
http://s1.shard.jp/frhorton/h8s9rb8r9.html
+
There are several methods for locating vacuum leaks. Occasionally, you may experience a vacuum leak into the intake ports from the crankcase of the motor due to the intake manifold / cylinder head interface not being machined parallel. No amount of propane or carburetor cleaner will find such a leak. The best way is to insure the elimination of such a problem while building the motor. See the wiki article: [[Manifold/Head vacuum leak, internal]].
<a href="http://s1.shard.jp/frhorton/h8s9rb8r9.html">african design form function object traditional
+
 
</a>
+
=Propane method=
[url=http://s1.shard.jp/frhorton/h8s9rb8r9.html]train trips south africa
+
 
[/url]
+
#Get a soldering propane tank and valve attachment.
[link=http://s1.shard.jp/frhorton/h8s9rb8r9.html]africa tribes photos
+
#Unscrew the end of it so you have a threaded pipe without the nozzle.
[/link]
+
#Attach a 2 foot piece of hose to the end.
consumer rating auto insurance company
+
#Start the engine and let it warm up a bit.
http://s1.shard.jp/olharder/prestige-auto.html
+
#Turn on the propane and run the hose all around the vacuum lines and the bottom of the carb.
<a href="http://s1.shard.jp/olharder/prestige-auto.html">grand theft auto 3 strategy
+
#If the engine smooths out or revs up a bit, you have found your leak.
</a>
+
 
[url=http://s1.shard.jp/olharder/prestige-auto.html]midway auto sales
+
Hold bottle UPRIGHT during testing as liquid propane may run out of an inverted bottle.
[/url]
+
 
[link=http://s1.shard.jp/olharder/prestige-auto.html]autocad rendering tutorial
+
PLEASE do this in a well ventilated area due to propane gas and exhaust fumes!!
[/link]
+
 
auto becker radio
+
Fixing a leak.  My old neighbor built circle track cars and after the ran the engine he would shut it off...tape off every opening with duct tape then put a hose over the dip stick and hook up to a vacuum source. He would then get his stethascope and listen in the area where the propane or carb fluid indicated a leak. he used Rtv and calked into the area until the stethascope whistle stopped. too much vacuum will pull too much calk into the hole.
http://s1.shard.jp/olharder/auto-part-for.html
+
 
<a href="http://s1.shard.jp/olharder/auto-part-for.html">aa auto parts
+
=Carburetor cleaner method=
</a>
+
#With the car running, using a can of carburetor cleaner spray down the hoses and vacuum connections.
[url=http://s1.shard.jp/olharder/auto-part-for.html]automotive development industry policy sme smi
+
#Notice a change in the running of the engine and you might have found your leak.
[/url]
+
 
[link=http://s1.shard.jp/olharder/auto-part-for.html]auto invite
+
[[Category:Engine]]
[/link]
+
africa songhai
+
  http://s1.shard.jp/frhorton/y6gqutu2n.html
+
<a href="http://s1.shard.jp/frhorton/y6gqutu2n.html">african cave dwelling pic spider</a>
+
[url=http://s1.shard.jp/frhorton/y6gqutu2n.html]african american health woman
+
[/url]
+
[link=http://s1.shard.jp/frhorton/y6gqutu2n.html]south african politician
+
[/link]
+
site http://s1.shard.jp/olharder/autoroll-654.html
+
<a href="http://s1.shard.jp/olharder/autoroll-654.html">domain</a>
+
[url=http://s1.shard.jp/olharder/autoroll-654.html]index[/url]
+
[link=http://s1.shard.jp/olharder/autoroll-654.html]http[/link]
+

Revision as of 23:39, 29 May 2009

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox