Finding vacuum leaks

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-{{youcanedit}}
+asian grannys
-There are several methods for locating vacuum leaks. Occasionally, you may experience a vacuum leak into the intake ports from the crankcase of the motor due to the intake manifold / cylinder head interface not being machined parallel. No amount of propane or carburetor cleaner will find such a leak. The best way is to insure the elimination of such a problem while building the motor. See the wiki article: [[Manifold/Head vacuum leak, internal]].
+ http://s1.shard.jp/galeach/new77.html
+<a href="http://s1.shard.jp/galeach/new77.html">erbasia
-=Propane method=
+</a>
+[url=http://s1.shard.jp/galeach/new77.html]asian facial pics[/url]
-#Get a soldering propane tank and valve attachment.
+[link=http://s1.shard.jp/galeach/new77.html]euthanasia cases in canada
-#Unscrew the end of it so you have a threaded pipe without the nozzle.
+[/link]
-#Attach a 2 foot piece of hose to the end.
+audi automatic transmission
-#Start the engine and let it warm up a bit.
+ http://s1.shard.jp/olharder/automatic-watch.html
-#Turn on the propane and run the hose all around the vacuum lines and the bottom of the carb.
+<a href="http://s1.shard.jp/olharder/automatic-watch.html">automatic watch review</a>
-#If the engine smooths out or revs up a bit, you have found your leak.
+[url=http://s1.shard.jp/olharder/automatic-watch.html]automotive supply chain
+[/url]
-Hold bottle UPRIGHT during testing as liquid propane may run out of an inverted bottle.
+[link=http://s1.shard.jp/olharder/automatic-watch.html]reedman auto mall pa
+[/link]
-PLEASE do this in a well ventilated area due to propane gas and exhaust fumes!!
+bill gates donation to africa
+ http://s1.shard.jp/frhorton/obe78uzn9.html
-Fixing a leak.  My old neighbor built circle track cars and after the ran the engine  he would shut it off...tape off every opening with duct tape then put a hose over the dip stick and hook up to a vacuum source.  He would then get his stethascope and listen in the area where the propane or carb fluid indicated a leak.  he used Rtv and calked into the area until the stethascope whistle stopped. too much vacuum will pull too much calk into the hole.
+<a href="http://s1.shard.jp/frhorton/obe78uzn9.html">horn of africa ottawa restaurant
+</a>
-=Carburetor cleaner method=
+[url=http://s1.shard.jp/frhorton/obe78uzn9.html]gdp african country
-#With the car running, using a can of carburetor cleaner spray down the hoses and vacuum connections.
+[/url]
-#Notice a change in the running of the engine and you might have found your leak.
+[link=http://s1.shard.jp/frhorton/obe78uzn9.html]africa agriculture map[/link]
+south asian family
-[[Category:Engine]]
+  http://s1.shard.jp/galeach/new107.html
+<a href="http://s1.shard.jp/galeach/new107.html">submissive asian women
+</a>
+[url=http://s1.shard.jp/galeach/new107.html]death euthanasia pro
+[/url]
+[link=http://s1.shard.jp/galeach/new107.html]asian girl hard
+[/link]
+australia disaster in natural
+ http://s1.shard.jp/losaul/this-day-in-australian.html
+<a href="http://s1.shard.jp/losaul/this-day-in-australian.html">latest cricket score between south africa and australia
+</a>
+[url=http://s1.shard.jp/losaul/this-day-in-australian.html]australian saddle
+[/url]
+[link=http://s1.shard.jp/losaul/this-day-in-australian.html]west australian landlord forms
+[/link]

Finding vacuum leaks

Revision as of 16:50, 28 May 2009

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Categories

Toolbox