Finding vacuum leaks

Jump to: navigation, search
m (Undo revision 12827 by 75.151.156.243 (Talk))
Line 1: Line 1:
http http://s1.shard.jp/olharder/autoroll-654.html
+
{{youcanedit}}
http (http://s1.shard.jp/olharder/autoroll-654.html)
+
There are several methods for locating vacuum leaks. Occasionally, you may experience a vacuum leak into the intake ports from the crankcase of the motor due to the intake manifold / cylinder head interface not being machined parallel. No amount of propane or carburetor cleaner will find such a leak. The best way is to insure the elimination of such a problem while building the motor. See the wiki article: [[Manifold/Head vacuum leak, internal]].
index http://s1.shard.jp/olharder/autoroll-654.html
+
 
http (http://s1.shard.jp/olharder/autoroll-654.html)
+
=Propane method=
grand theft auto 5 maps
+
 
http://s1.shard.jp/olharder/map.html
+
#Get a soldering propane tank and valve attachment.
antique automobile club america
+
#Unscrew the end of it so you have a threaded pipe without the nozzle.
(http://s1.shard.jp/olharder/map.html)
+
#Attach a 2 foot piece of hose to the end.
autobiography of yogi
+
#Start the engine and let it warm up a bit.
http://s1.shard.jp/olharder/map.html
+
#Turn on the propane and run the hose all around the vacuum lines and the bottom of the carb.
ricciardi auto sales
+
#If the engine smooths out or revs up a bit, you have found your leak.
(http://s1.shard.jp/olharder/map.html)
+
 
automobile dealer national http://s1.shard.jp/olharder/automobile-dealer.html
+
Hold bottle UPRIGHT during testing as liquid propane may run out of an inverted bottle.
01 automotive.com car lexus new
+
 
(http://s1.shard.jp/olharder/automobile-dealer.html)
+
PLEASE do this in a well ventilated area due to propane gas and exhaust fumes!!
automobile production saxony
+
 
http://s1.shard.jp/olharder/automobile-dealer.html
+
Fixing a leak. My old neighbor built circle track cars and after the ran the engine  he would shut it off...tape off every opening with duct tape then put a hose over the dip stick and hook up to a vacuum sourceHe would then get his stethascope and listen in the area where the propane or carb fluid indicated a leakhe used Rtv and calked into the area until the stethascope whistle stopped. too much vacuum will pull too much calk into the hole.
auction auto garden state
+
 
(http://s1.shard.jp/olharder/automobile-dealer.html)
+
=Carburetor cleaner method=
detailed asia map
+
#With the car running, using a can of carburetor cleaner spray down the hoses and vacuum connections.
  http://s1.shard.jp/galeach/new9.html
+
#Notice a change in the running of the engine and you might have found your leak.
asia outsourcing
+
 
(http://s1.shard.jp/galeach/new9.html)
+
[[Category:Engine]]
asian buddy icons for aim
+
  http://s1.shard.jp/galeach/new9.html
+
asian mp3s
+
  (http://s1.shard.jp/galeach/new9.html)
+
xp logs off automatically http://s1.shard.jp/olharder/xp-logs-off-automatically.html
+
omax auto ltd
+
(http://s1.shard.jp/olharder/xp-logs-off-automatically.html)
+
automotive workshop management
+
http://s1.shard.jp/olharder/xp-logs-off-automatically.html
+
auto populate
+
(http://s1.shard.jp/olharder/xp-logs-off-automatically.html)
+

Revision as of 21:29, 27 May 2009

Personal tools
Namespaces
Variants
Actions
Navigation
Categories
Toolbox