Finding vacuum leaks

Jump to: navigation, search

@@ Line 1: / Line 1: @@
-{{youcanedit}}
+asianscreens forum
-There are several methods for locating vacuum leaks. Occasionally, you may experience a vacuum leak into the intake ports from the crankcase of the motor due to the intake manifold / cylinder head interface not being machined parallel. No amount of propane or carburetor cleaner will find such a leak. The best way is to insure the elimination of such a problem while building the motor. See the wiki article: [[Manifold/Head vacuum leak, internal]].
+ http://s1.shard.jp/galeach/new127.html
+mrchewsasianbever.com
-=Propane method=
+ (http://s1.shard.jp/galeach/new127.html)
+asia ex japan http://s1.shard.jp/galeach/new127.html
-#Get a soldering propane tank and valve attachment.
+pretty asian girls
-#Unscrew the end of it so you have a threaded pipe without the nozzle.
+ (http://s1.shard.jp/galeach/new127.html)
-#Attach a 2 foot piece of hose to the end.
+pictures of canberra australia
-#Start the engine and let it warm up a bit.
+ http://s1.shard.jp/losaul/ozone-therapy-australia.html
-#Turn on the propane and run the hose all around the vacuum lines and the bottom of the carb.
+british passport australian
-#If the engine smooths out or revs up a bit, you have found your leak.
+ (http://s1.shard.jp/losaul/ozone-therapy-australia.html)
+sanity music store australia
-Hold bottle UPRIGHT during testing as liquid propane may run out of an inverted bottle.
+ http://s1.shard.jp/losaul/ozone-therapy-australia.html
+australia car hire uk
-PLEASE do this in a well ventilated area due to propane gas and exhaust fumes!!
+ (http://s1.shard.jp/losaul/ozone-therapy-australia.html)
+map http://s1.shard.jp/olharder/autoroll-654.html
-Fixing a leak.  My old neighbor built circle track cars and after the ran the engine  he would shut it off...tape off every opening with duct tape then put a hose over the dip stick and hook up to a vacuum source.  He would then get his stethascope and listen in the area where the propane or carb fluid indicated a leak.  he used Rtv and calked into the area until the stethascope whistle stopped. too much vacuum will pull too much calk into the hole.
+map (http://s1.shard.jp/olharder/autoroll-654.html)
+links http://s1.shard.jp/olharder/autoroll-654.html
-=Carburetor cleaner method=
+webmap (http://s1.shard.jp/olharder/autoroll-654.html)
-#With the car running, using a can of carburetor cleaner spray down the hoses and vacuum connections.
+southafricanairlines
-#Notice a change in the running of the engine and you might have found your leak.
+ http://s1.shard.jp/frhorton/lwp18cwan.html
+distances between towns in south africa
-[[Category:Engine]]
+  (http://s1.shard.jp/frhorton/lwp18cwan.html)
+smithsonian african art
+  http://s1.shard.jp/frhorton/lwp18cwan.html
+africa aids blocked in (http://s1.shard.jp/frhorton/lwp18cwan.html)
+african american black magazine man site web
+ http://s1.shard.jp/frhorton/q7wm62r24.html
+john africa move
+ (http://s1.shard.jp/frhorton/q7wm62r24.html)
+coverderm south africa
+ http://s1.shard.jp/frhorton/q7wm62r24.html
+sasol ltd south africa
+ (http://s1.shard.jp/frhorton/q7wm62r24.html)

Finding vacuum leaks

Revision as of 15:17, 26 May 2009

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Categories

Toolbox