Drop base type air cleaner
m |
m |
||
| Line 11: | Line 11: | ||
[[File:Moroso drop base air cleaner.jpg|frame|left|Moroso p/n 65927 drop base air cleaner assembly]] | [[File:Moroso drop base air cleaner.jpg|frame|left|Moroso p/n 65927 drop base air cleaner assembly]] | ||
| − | + | <br style="clear: both" /> | |
| − | ===HEI clearance=== | + | ===HEI clearance=== |
Besides the drop for hood clearance, to some having room for an HEI distributor is important. Considerable cutting was needed on the L88 base as seen below: | Besides the drop for hood clearance, to some having room for an HEI distributor is important. Considerable cutting was needed on the L88 base as seen below: | ||
[[File:L88 drop base clearance hei.jpg|frame|left|400px| L88 14" drop base HEI clearance]] | [[File:L88 drop base clearance hei.jpg|frame|left|400px| L88 14" drop base HEI clearance]] | ||
| − | <br style="clear: both" />The Moroso (below) has better clearance: | + | <br style="clear: both" />The difference in the amount of drop between the two bases- the L88 is lower. Also note the Moroso (below) has better HEI clearance: |
[[File:Moroso drop base clearance hei.jpg|frame|left|400px|Moroso p/n 65927 14" drop base clearance HEI]] | [[File:Moroso drop base clearance hei.jpg|frame|left|400px|Moroso p/n 65927 14" drop base clearance HEI]] | ||
| − | <br style="clear: both" /> | + | <br style="clear: both" /> |
| + | ==Other things that can be done to gain clearance== | ||
| − | + | Using a bolt to hold down the air filter assembly lid will gain some clearance. Cut or find a suitable bolt that fits instead of using a stud and wing nut. | |
[[Category:Engine]] | [[Category:Engine]] | ||
Your Privacy Choices